Top Quality Resin Motorcycle Tank Pad 

​​​​​​​honest-sal

​​​​​​​Motorcycle Accessories

 Exclusive to honest-sal ebay store

 New premium tank protection pad

​​​​​​​

- Material:             High quality,​​​​​​​ non yellowing PU (Polyurethane) resin            ​​​​​​​​​​​​​​

- Height :               20.3 cm

​​​​​​​- Width (Top) :      14.4 cm

- Width (Bottom) : 6.5 cm                           ​​​​​​​

Installation Guide:

1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.

2. Without peeling, place the pad on the tank, align it and mark with paper tape.

3. Peel and apply the pad. 

4. Press the air bubbles out.

5. Allow 12 hours for the pad to set in. Do not ride straight away.

6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.


Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.

Feedback

- Please get in touch if you have any issues or questions.

- Don't just leave negative feedback as it won't solve the problem.

- Your satisfaction is our priority


honest-sal ​​​​​​​Motorcycle Accessories Resin motorcycle tank pad Direct from trusted manufacturers High Quality Best Price Fresh stocks New designs every month New fresh stock. High quality non yellowing PU resin. Oven dried for smooth finish Buy with confidence - Material: PU (Polyurethane) resin ​​​​​​​- Type: Fish bone style - Height : 20 cm ​​​​​​​- Width (Top) : 14 cm - Width (Bottom): 7 cm ​​​​​​​ Installation Guide: 1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible. 2. Without peeling, place the pad on the tank, align it and mark with paper tape. 3. Peel and apply the pad. 4. Press the air bubbles out. Use cloth if necessary. 5. Allow 12 hours for the pad to set in. Do not ride straight away. 5. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish. Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application. Feedback - Please get in touch if you have any issues or questions. - Don't just leave negative feedback as it won't solve the problem. - Your satisfaction is my priority Just in. Fresh stock direct from supplier. Sticks very well, looks nice and does the job. Tip: Once you have applied the pad, coat it with spray wax and wipe off. Material: PU (Polyurethane) Colour (Main): Black Type: Spine Fitment: Fits most - check tank size against dimensions below Height: 19.5 cm Width (Top): 15 cm Width (Bottom): 6 cm PU resin is soft and stays soft over time thus avoiding lifting of edges. Stay away from cheaper epoxy resin alternatives which become brittle in no time. I test these pads frequently and order fresh stock. If you have any concerns please contact me straight away Tank pad installation guide (Duration 10-15 minutes): 1. Place the pad on the tank and find the perfect location 2. Crucial step: Use IPA cleaner to clean the tank of grease, wax, polish etc. if you don’t do it the pad won’t stick properly 3. Do not use petrol or methylated spirits as they do leave a very thin layer of grease 4. Move your bike on centre stand if you have one 5. Without peeling the pad, place it on the tank aligning perfectly and use paper tape to mark positions/corners. 6. Use a hairdryer to soften the pad in extreme cold 7. Apply the pad gradually ensuring it is within your marked area 8. Using a soft cloth, press it outwards from centre to squeeze air bubbles out 9. Ensure all corners are pressed in Track Page Views WithAuctiva's FREE Counter [Track Page Views With Auctiva's FREE Counter] (https://pages.ebay.com/seller-center/listing/listing-advanced-sellers/third-party-listing-tools.html#m22_tb_a2__13)



Top Quality Resin Motorcycle Tank Pad 

​​​​​​​honest-sal

​​​​​​​Motorcycle Accessories

 Exclusive to honest-sal ebay store

 New premium tank protection pad

​​​​​​​

- Material:             High quality,​​​​​​​ non yellowing PU (Polyurethane) resin            ​​​​​​​​​​​​​​

- Height :               20.3 cm

​​​​​​​- Width (Top) :      14.4 cm

- Width (Bottom) : 6.5 cm                           ​​​​​​​

Installation Guide:

1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.

2. Without peeling, place the pad on the tank, align it and mark with paper tape.

3. Peel and apply the pad. 

4. Press the air bubbles out.

5. Allow 12 hours for the pad to set in. Do not ride straight away.

6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.


Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.

Feedback

- Please get in touch if you have any issues or questions.

- Don't just leave negative feedback as it won't solve the problem.

- Your satisfaction is our priority