boostprojects-header2

Aem 30-4110NS 52mm Wideband O2 UEGO Air Fuel Controller AFR Gauge No Sensor

Aem 30-4110NS AFR Wideband O2 UEGO  Controller Gauge Sensor Bosch Walker
 

Description

<<<<<<<<<<<<<<<< IN STOCK >>>>>>>>>>>>>>>>>

This model does not include sensor. Use the following link for model with Bosch 4.9 LSU wideband sensor  https://www.ebay.com/itm/274327127100

BRAND NEW IN BOX

PRODUCT DESCRIPTION :

AEM's part number 30-4110NS Wideband UEGO air/fuel ratio Controller Gauge is sold without a wideband sensor. This allows users to source a Bosch 4.9LSU sensor separately to potentially save money.

AEM’s legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean.

AEM tested many sensors with the 30-4110NS, including popular inexpensive knockoff sensors, and determined that only the following sensors will deliver reliable performance:

Using the above sensors ensures that the factory sensor calibration is accurate and that the controller performs optimally. The use of any non-approved sensor may affect the controller’s operation, and will void the warranty of the 30-4110NS.

WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER?
AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.

WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.

WHAT IS FREE-AIR CALIBRATION?
Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use Bosch 4.9 LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated by Bosch and never require free air calibration!

CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?
No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.


SPECIFICATIONS :

AFR VALUE RANGE BY FUEL TYPES:

Center LED Readout Displays Gasoline Values from 10 to 18 :1 AFR
Outer LED Ring Displays Gasoline values from 11 to 16.75 :1 AFR
0-5V Output Gasoline values from 10 to 20 :1 AFR
0-5V Output E85 values from 6.6 to 13.2 :1 AFR
0-5V Output Ethanol values from 6.14 to 12.3 :1 AFR
0-5V Output Methanol values from 4.4 to 8.8 :1 AFR
0-5V Output Lambda values from .68 to 1.36
Center LED Readout Displays Lambda values from .68 to 1.23
Outer LED Ring Displays Lambda values from .75 to 1.14

FEATURES:

Our World-famous Wideband O2 air/fuel ratio UEGO gauge features a digital LED display and sweeping LED 'needle' that changes colors as AFR changes from rich to lean. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM digital gauges feature a 0-5v analog output for use with data loggers and almost any engine management system. Each gauge comes with black and silver bezels and black and white faceplates for multiple color combinations and a custom look (a black Lambda faceplate and black and white Air/Fuel Ratio faceplates).

The Bosch UEGO sensor gives the controller its speed and accuracy. The Bosch 4.9 LSU sensor used in the 30-4110 AEM Wideband UEGO AFR Controller Gauge has a faster light off time and draws less current than the 4.2 LSU sensor used with AEM’s discontinued 30-4100 Wideband UEGO Controller Gauge. The 4.9 LSU sensor features the same fuel compatibility as the 4.2 LSU and NEVER requires free-air calibration when used with AEM’s 30-4110 Wideband UEGO AFR Gauge. The 30-4110’s 4.9 LSU sensor uses a different connector than the connector used with the 4.2 LSU sensors included with the original, discontinued 30-4100 gauge controller. The sensors are not interchangeable between the two gauge controllers in any way, including changing connectors on the gauges.

The Wideband O2 air/fuel ratio UEGO gauge is a must if you want to maximize your engine's power and safety. When tuning an engine, accurate air/fuel ratio data is critical because running with too rich of an AFR can cause a loss of power, and running a lean AFR can result in serious engine damage. AEM's digital Wideband AFR UEGO gauge can quickly alert you to even a .1 change in air/fuel ratio and provide enough time to shut down an engine before damage occurs.

Controller gauge and hardware sold without wideband sensor
Weld-in bung included
No free air sensor calibration required with approved sensors
52mm (2-1/16”) gauge housing
0-5v analog output (10-20 AFR range only)
RS232 Serial Output
Interchangeable black/white faceplates and black/silver bezels included


Includes:
  • UEGO Gauge Assembly
  • O2 Sensor Bung
  • 4x Butt Connectors
  • 4 Lead Harness
  • UEGO Sensor Harness
  • Silver Bezel
  • Black Lambda Faceplate
  • White AFR Faceplate
APPROVED SENSORS FOR USE WITH 30-4110NS

Manufacturer

Part Number

Description

AEM

30-2004

Bosch LSU4.9 (950mm)

Bosch

17025

Bosch LSU4.9 (950mm)

Walker

250-25036

Bosch LSU4.9 (950mm)

Walker

250-25075

Bosch LSU4.9 (325mm)



Ask us about saving money with our PACKAGE DEALS
CP Cometic ACL Ferrea and ARP KitsCustom Made Package Deals
AEM Package DealsPackage Deals
Ask us about combining purchases for package deal auctions
  • Pistons
  • Rods
  • Bearings
  • Head and Main Studs
  • and more...

Shipping

  • We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
  • We also offer expedited shipping at an extra cost.
  • International shipping rate applies to addresses in all other locations
  • Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
  • Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated.Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
  • There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.
  • We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
  • Ebay Promotional Shipping is only good for shipments going to 48 lower states only.
  • We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
  • Shipping charges are non-refundable.
  • We will gladly combine shipping charges to one charged based on the total weight of the package.      

Payment

  • We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.
  • International Buyers, please contact us before bidding to discuss the shipping cost.
  • We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any questions..

If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any questions.