➢Plug and play Design 

➢Dual relay output 

✽be able to connect with cooling and heating equipment at the same time

➢Displayed Reading

✽Support reading with Centigrade or Fahrenheit unit

➢Temperature Calibration

➢Maximum output load

✽1200W(120V)/2400W(240V)

➢Supported Alarms

✽High and low temperature alarms

✽Over-temperature and sensor fault alarm

➢1 Year Warranty

➢Devices Protection

✽Heating/cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change

✽Compressor delay protection for refrigeration control

➢Package Included

✽1x ITC-308 Temperature Controller

✽1x Manual

✽1xNTC Sensor

✽1xWarranty Card

Specification:

• Temperature Control Range : -50~120 °C / -58~248 ° F
• Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
• Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz
• Temperature Control Output: Max. 10A, 100V ~240V AC (It can apply to the voltage from 100V to 240V)
• Buzzer Alarm: High and Low
• Temperature Alarm Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) Socket: 85x42x24mm(3.3x1.7x1inch)
• Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft
• Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
• Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Humidity 20~85% (No Condensate)
• The diameter of the probe is about 5mm.
• Warranty: 1 Year