4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600CE-T
Overview
The SIM7600CE 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Features
- Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
- Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, LBS base station positioning
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the working status
- Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Communications Specifications
|
LTE |
WCDMA / TD-SCDMA / CDMA 2000 |
EDGE |
GSM/GPRS |
Band |
SIM7600E-H:
-- LTE-FDD B1/B3/B5/B7/B8/B20
-- LTE-TDD B38/B40/B41 |
SIM7600E-H:
-- UMTS/HSPA+ B1/B5/B8
|
GSM/GPRS/EDGE 900/1800 MHz |
SIM7600CE-T:
-- LTE-TDD B38/B39/B40/B41
-- LTE-FDD B1/B3/B8 |
SIM7600CE-T:
-- UMTS/HSDPA/HSPA+ B1/B8
-- TD-SCDMA B34/B39
-- CDMA 1X/EVDO BC0 |
Generation |
4G |
3G |
2.5G |
2G |
Emitting power |
0.25W |
0.5W@EGSM900
0.4W@DCS1800 |
2W@GSM900
1W@DCS1800 |
Data Speed |
LTE CAT 4
Uplink≤50 Mbps
Downlink≤150 Mbps |
UMTS
Uplink≤384Kbps
Downlink≤384Kbps |
EDGE
Uplink≤236.8kbps
Downlink≤236.8kbps |
GPRS
Uplink≤85.6kbps
Downlink≤85.6kbps |
|
HSPA+
Uplink≤5.76Mbps
Downlink≤42Mbps |
|
|
SIM Card |
Normal SIM (Not Included) |
Applicable Region |
SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.
Please check the supported bands according to your local service provider, select the proper one when placing order. |
GNSS Specifications
- Receiver type
- Sensitivity
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
- Cold starts: -148 dBm
- Time-To-First-Fix (open air)
- Cold starts: <35s
- Hot starts: <1s
- Accuracy
SMS and Audio Specifications
- SMS
- Supported types: MT, MO, CB, Text, PDU
- Storage: USIM card and ME (default)
- Audio feature
- Supports echo cancellation
- Supports noise reduction
Other Specifications
- Power supply: 5V
- Operating voltage: 5V/3.3V (configured via jumper)
- Operating temperature: -30°C ~ 80°C
- Storage temperature: -45°C ~ 90°C
- Dimension: 56.21mm x 65.15mm
What's on Board
- SIM7600CE-T
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
- MP2128DT power chip
- MP1482 power chip
- Raspberry Pi GPIO header: for connecting with Raspberry Pi
- SIM7600 control interface: for connecting with host boards like Arduino/STM32
- SIM card slot: supports 1.8V/3V SIM card
- TF card slot: allows file/SMS/... storage
- 3.5mm earphone/mic jack
- USB interface: for testing AT Commands, getting GPS positioning data, etc.
- USB to UART interface: for serial debugging, or login to Raspberry Pi
- MAIN antenna connector
- AUX antenna connector
- GNSS antenna connector
- Power switch
- Network status indicator
- Power indicator
- Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
- UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART
Dimension
Development Resources
Wiki : www.waveshare.com/wiki/SIM7600CE_4G_HAT
Terms & Conditions |
Payment: |
· PayPal is the only method of payment that we accept. |
Shipping: |
· We ship items to Worldwide!
· Please confirm your address in paypal, phone number is also very important.
· All items will be shipped within 48 working hours on receipt of cleared payment.
· We'll add a tracking number after sending the item so that you can track your parcel.
|
Returns Policy: |
· We are happy to return any unused item in its original packaging within 14 days of delivery.
· Buyers are responsible for the round(two-way) shipping cost.
|
Feedback: |
· We'll leave POSITIVE FEEDBACK on receipt of cleared payment.
· If you're satisfied with the item and our service, please leave POSITIVE FEEDBACK, it's important to us.
· Once any problems occured, please contact us first. We'll try our best to work things out.
|
FAQ: |
· More details(Click) |
If you have any question, please feel free to contact us. It's our pleasure to serve you!
We appreciate your business!