• • Item Features:
     Application:The switch can Universal 12V-48V,can used low voltage control high voltage(12-48V Control 1V-250V),  garage，Motor,Light,electric doors, windows, lifting equipment, gateways, lifters, industrial control and security industries.Learn code control,high confidentiality.it convenient to Wireless control and connector,Reduce wiring diagram engineering

    Descriptions:

    1.Remote Transmitter

    Channel: 2 CH

    Remote Control Distance: 0-50m

    Encode: Learn Code,Fixed code, soldering

    Frequency:315 MHz/433MHz

    Power Supply: 1 X 6V/(2016 battery)

     

    2.Control Model:

    Control Types:

    1.Toggle/Self-Lock: Press->On; Press again->Off

    press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).

    2.Latched/Inter-Lock: Press->On; Press other button->Off

    press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).

    3.Momentary/Jog: Press and hold->On; Release->Off

    Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )

    (Factory Original Setting is  Momentary,other work model Change it by yourself.or email us help you set)

    Decode: Learning code

    Power Supply (Operating Voltage): DC 12V-48V,12V 24V 36V 48V

    Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC,10A 1V-280V

    Work Voltage Range of Relay:  10A 1V-250V,AC 110-240V or DC 0-28V (Not receiver)

    sensitivity:-105 dBm

    Operating Temperature:-40'C~+80'C

     

    3.Learn code and Remove Code

    Add remote control method
       1 Connector the switch to 12V-48V
       2 press the switch board learn button (1-3 second),till the switch LED lighting..
       3 after press the remote control button, till the switch LED lighting.. the relay will be ON or OFF.
       4 test  the controller control the switch.. press the control button, the relay will be on and off.. you can hear it.
     Remove Remote control:
     1 Connector the switch to 12V-48V

    2 Press the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.The remote controller can not control the switch relay.
    

    Package:

    1/2/3 x Remote Control Transmitter (Battery include)

    1 x 12V-48V 2CH Switch Receiver