PS15/36B 1.5 mod 36 tooth Metric Pitch Plastic Spur Gear (30% glass filled n...
Spur Gear 1.5mod - 20° p.a. in 30% Glass Filled Nylon 6. Bore unmachined typically 0.5-1mm undersized Standard tolerances, unless otherwise stated ±0.25mm. A gear is a rotating machine part having cut teeth which mesh with another toothed gear of the same pitch to transmit torque. Two or more gears working in tandem are called a transmission and can produce a mechanical advantage through a gear ratio and thus may be considered a simple machine. Geared devices can change the speed, torque, and direction of a power source. The most common situation is for a gear to mesh with another gear, however, a gear can also mesh with a non-rotating toothed part called a rack, thereby producing translation instead of rotation. An advantage of gears is that the teeth of a gear prevent slippage. When two gears mesh, and one gear is bigger than the other (even though the size of the teeth must match), a mechanical advantage is produced, with the rotational speeds and the torques of the two gears differing in an inverse relationship.Please note - All dimensions including bore sizes are subject to change. If a dimension is critical to your application please contact us for confirmation.