The kit includes a smartphone/iPhone mirroring adapter and a video connection cable for Toyota Touch 2 / Entune monitors.
Adapter
Adapter for connecting iOS and Android devices to the car multimedia system. Allows to play video and audio on the connected monitor. Supports screens mirroring to display navigation, menu, applications, etc. on the connected monitor.
The adapter is connected to the monitor via RCA cable. iPhone/iPod/iPad or Android phone/tablet PC are connected to the adapter via Wi-Fi and thus stream video and audio to the connected monitor. Screen mirroring function is also supported.
Note! The sound may be missing because the adapter uses a specific audio signal without the GND signal and some equipment can't recognize this type of signal. The simplest solution is to put a jumper between the terminals.
Note! The adapter supports devices with iOS11 operating system.
Video connection cable
This cable allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using the video interface. After the cable connection "AV input" icon is automatically activated in the monitor and video in motion is unlocked. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal.
Note! In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
Adapter and Cable for Toyota
Video Review
Adapter
Cable
Adapter and Cable for Toyota
Compatibility
Touch 2
| Model | Model years | System | Additional compatibility conditions | |
|---|---|---|---|---|
| From | To | |||
| Auris | 2014 | – | Toyota Touch 2 Toyota Touch 2 with Go Toyota Touch 2 with Go Plus |
28 pin socket on the monitor for cable connection |
| Avensis | 2014 | – | ||
| Camry | 2014 | 2017 | ||
| Corolla | 2013 | 2018 | ||
| Corolla Sedan | 2013 | 2018 | ||
| Highlander | 2013 | – | ||
| Hilux | 2013 | – | ||
| Land Cruiser 150 | 2013 | – | ||
| Prius+ | 2014 | – | ||
| RAV4 | 2014 | 2018 | ||
| Verso | 2014 | – | ||
| Verso S | 2013 | – | ||
| Yaris | 2014 | – | ||
Entune
| Model | Model years | System | Additional compatibility conditions | |
|---|---|---|---|---|
| From | To | |||
| 4Runner | 2014 | – | Entune Audio Entune Audio Plus Entune Premium Audio |
28 pin socket on the monitor for cable connection |
| Avalon | 2014 | – | ||
| Camry | 2014 | 2017 | ||
| Corolla | 2013 | 2018 | ||
| Fortuner | 2015 | – | ||
| Highlander | 2013 | – | ||
| Prius c | 2014 | – | ||
| Prius v | 2014 | – | ||
| RAV4 | 2014 | 2018 | ||
| Sequoia | 2014 | – | ||
| Sienna | 2014 | – | ||
| Tacoma | 2014 | – | ||
| Tundra | 2014 | – | ||
| Venza | 2014 | – | ||
Adapter and Cable for Toyota
Adapter Technical Specifications
| Signal standards | Miracast, Airplay, DLNA |
| Wi-Fi | 802.1 b/g/n |
| Frequency | 2.4 GHz |
| Working temperature | -20°C~75°C |
| Outputs: | AV |
| HDMI | |
| Weight | 133 |
| Dimensions | 86 mm × 58 mm × 18 mm |
| Input voltage | 12 V |
| Consumed power | 2.5 W |
Adapter and Cable for Toyota
Manuals
To adjust the video system of the input video signal or switch the picture mode (4:3, 16:9), refer to the user manual of your monitor.
Note! After this cable connection the OEM microphone of OEM BT-HandsFree will work the same way as before (if it has been installed). if there is no OEM microphone in your car, you will need the AV cable with microphone. Please, contact the manager to purchase that cable (or leave the comments in the order).
Adapter and Cable for Toyota
Package Content
- Adapter with Wi-Fi antenna and connection cables
- Video connection cable
Package content and appearance may differ from those presented on the website. Please ask the sales specialist before purchase.
If you have any questions, please don't hesitate to contact us!