Made to order by us...
This lead is designed for any amplifier to any passive speaker cab that has 1/4" 6.35mm Jack connections.
Typical applications are:
Guitar amplifier head to cabinet
Link lead to connect 2 passive speakers
Connecting tops to subs
PA Amplifier to passive speaker cab
Note if you are using 2 leads on one speaker cab Or amplifier ETC please ensure the jack sockets are at least 20mm apart from each other, this is due to the size of the jack plugs body of 19mm.
Connectors
Neutrik Rean NYS225 1/4" 6.35mm jack plugs used on this lead with crimp type cord grip. This is sometimes called a Jumbo jack due to the body size of 19mm Or 0.75 Inch diameter.
Cable
The cable used in the lead is a high grade loudspeaker cable manufactured in Germany. This lead can be used for touring, hire, rehearsal studios, it is very hard wearing cable. We looked at many different types of cable from all over the world from many different suppliers before we chose this cable to manufacture this lead. It is truly is quality cable.
Cable Length
Length is visible length, this is to the rear of each of the connectors - Please ensure you have enough cable. We can add more cable if you need it within reason - it is better to have a short cable than a cable that is to long. Leave a message when ordering.
Klotz LY215 Specifications:
Construction
Conductor stranded bare copper
Insulation PVC, blue & red
Core arrangement 2 cores twisted to a pair
Outer jacket PVC, matt black
Mechanics
min. bending radius 5x overall diameter
Working temperature -20°C / +70°C
Electric
Test voltage [50 Hz, 1 min] 2000 V
Max. operating voltage 300 V
Cond. cross section 1.5 mm²
Cond. construction 30 x 0.25 mm
Conductor resistance 12.5 Ω/km
Capacitance 150 pF/m
Inductance 0.56 µH/m
Outer diameter 7 mm
Colour black
Copper weight 30 g/m
Weight 0.08 kg/m
Connector Specification
Title: Rean NYS225
Connection Type: Plug
Gender: Male 1/4 Inch 2 Pole Mono
Physical Size
Tip to rear boot 89mm Or 3.5 Inches
Shell body Diameter 19mm Or 0.75 Inch
Electrical
Dielectric strength: 0.5 kVdc
Insulation resistance: ≥ 1 GΩ
Contact resistance: depends on mated connector
Rated current: depends on mated connector
Transmission Performance: null
Mechanical
Cable O.D: ≤ 8 mm
Wiresize: 12 AWG
Material
Contact plating: 2 µm Ni
Contacts: Brass (CuZn39Pb3)
Shell: Zinc diecast (ZnAl4Cu1)
Shell plating: Nickel
Strain relief: SnCe plated, Crimp type
Insulation
Thermoplastic
Bushing: PVC
Environmental
Solderability: Complies with IEC 68-2-20
Temperature range: -20°C to +70 °C