Features:

1, motor new and good quality.

2, tail with 334 wire AB phase encoder, direct output square pulse, do not need to add the circuit, simple, the AB phase, can determine the direction of motor rotation, you can do other motor encoder

3, the long axis of the worm, you can drive the worm wheel or changed to elastic or steel coupling (specific look at the following picture)

The motor's coil DC resistance 30 ohm, the motor operating voltage can be from 3V to 24V. Resistance to turn current = voltage / coil resistance. 12V space and time around the speed of 8200rpm, 24V when the no-load speed of 16800, the speed of the other voltage can be roughly proportional.

Motor tail with the encoder, a total output of two orthogonal (phase difference of 90 degrees) pulse signal. Resolution 334, which means that the motor output of 334 cycles per rotation cycle pulse.

There are 51 simple procedures to provide a reference, we can connect the following link to the browser address bar to download:
HTTPS://pan.baidu.com/s/1kTsjBYR

Notes:

Encoder measured DC 1.8V to DC 3.3V are working properly

(if use DC 5V, suggested use a linear voltage buck regulator or modify coding circuit transmitting tube current limiting resistor R1, is currently 82 Ohms, circuit is mainly red emission tube power consumption, recommended by linear voltage buck regulator, or directly change the current limiting resistor, but require hands-on ability, otherwise easy to damage)

Package include:

Motor with encoder x 1pcs