9Bee Interface ESP8266

 

Descriptions:
Wee is a WIFI module based on ESP8266 SoC.
ESP8266 comes out of nowhere and has been taking by storm the IoT world.
You can find many hacking projects about it on the internet.
So far, the most popular ESP8266 breakout version only has GPIO0 and GPIO2 routed to the header.
Compared to it, Wee WIFI module is designed with
a standard Bee interface and has more GPIOs available for developers.
In a word, users can take full use of the utility of ESP8266 SoC by using Wee WIFI module in your projects.
Features
Standard Bee interface
indicators: TX, RX, PWR
FW/Work Switch
More GPIOs help developer take full use of the utility of ESP8266 SoC
Specification
PCB Size:23.9X26.2X1.6mm
Interface:Bee interface
Indicators:PWR?TX?RX

 

 

ESPDuino WIFI Dev Board

 

Descripion：

DC: 3.3-5V

ESPduino is developed by Doit company based on the ESP8266 ESP-13, which can be compatible with Arduino UNO R3 developmen board.

By using the ESP8266 WiFi and MCU,ESPduino supports WiFi. Compared to the traditional Arduino UNO development baord, users don't have to buy another WiFi development board

 

 

ESP-07 Serial WIFI Module V1.0

 

This is WiFi serial transceiver module, based on ESP8266 SoC.The SOC has Integrated TCP/IP protocol stack.It is TTL serial communication interface and its parameters can be set by AT command. It is widely used in networking, smart home project when it is connected to the wifi router. It can be used for remote monitoring of home appliances, bedroom temperature and humidity, controlling home appliances and smart car by the mobile phone.
Features:
For Arduino UNO R3 and the compatible board can directly connect to this module.
You can debug the module with the USB to TTL module, such as FT232RL, CH340G module.
Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
Working voltage: 4.5V - 5.5V (On-board 3.3v LDO Regulator)
Working current: 240mA(MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
On-board reset button
On-board switch to select UART mode or firmware update mode
Antenna Type: Built-in PCB antenna is available.
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
It is very easy to design projects by AT command
Applications: Home automation, sensor networks, industrial wireless control.

 

 

Serial WiFi Shield Board

Description:
The shield is designed based on esp8266 by Espressif Systems, pin-compatible with Arduino UNO/Mega2560 DevBorad.
WiFi module is industrial-grade chips ESP8266, which is ESP-12E with metal shield, strong anti-interference ability;
Shield is pin-compatible with Arduino Uno, Mega2560 and other control board. A voltage converter chip is used to deal with 3.3V (Esp8266) and 5V (Arduino);
Dual DIP switches is used for serial ports so that this module shield can be used alone as an Arduino Uno expansion board, and also be used as ESP8266 expansion board;
Serial data is transported to WiFi device transparently, and vice versa. Arduino program does not need any configuration;
WebServer is developed to configure WiFi parameters and serial port parameters;
The module shield can be used as an independent ESP8266 development board. for instance, downloading the official AT commands firmware, NodeMCU open source firmware can be used;
The module shield also can be used as stand-alone expansion board for Arduino Uno
Technical Specifications:
802.11 b / g / n wireless standards;
STA / AP modes support ;
TCP / IP protocol stack, One socket;
Supports standard TCP / UDP Server and Client;
Supports serial port baud rate configuration: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;
Supports serial data bits: 5/6/7/8 bits;
Supports serial parity: none;
Supports serial stop bits: 1/2 bit;
Pin-compatible with Arduino UNO, Mega;
Arduino Pinout 2/3/4/5/6/7/8/9/10/11/12/13;
ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / * UART TX / UART RX;
KEY button: modes configuration;
Dual-Ports DIP switches: switching Arduino and ESP8266;
WiFi operation current: continuous transmission operation: ≈70mA (200mA MAX), idle mode: <200uA;
Serial WiFi transmission rate: 110-460800bps;
Temperature: -40 degree ~ + 125 degree;
Humidity: 10 percent-90 degree non-condensing;

 

 

ESP8266 Grove Kit

 

Description:
ESP8266 Grove Kit is designed and developed by Shenzhen Doctors of Intelligence & Technology (SZDOIT). The module is designed based on esp8266 by Espressif Systems, which is a competitive WiFi solution. The module has the following interface for users, such as UART, IIC,AIO,DIO etc.
The grove connector pitch is 2.54mm. The PM5003 connector pitch is 1.27mm (NC,NC,NC,RX,TX,NC,GND,VCC)(Up to Down)
More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wiki
Technical Specifications:
802.11 b/ g/ n wireless standards;
STA/AP,STA+AP modes support ;
TCP/ IP protocol stack, One socket;
Supports standard TCP/UDP Server and Client;
Supports serial port baud rate configuration:
1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;
Supports serial data bits: 5/6/7/8 bits;
Supports serial parity: none;
Supports serial stop bits: 1/2 bit;
ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC/ EN/UART TX/ UART RX;
WiFi operation current: continuous transmission operation: ≈70mA (200mA MAX), idle mode:
Serial WiFi transmission rate: 110-460800bps;
Temperature: -40 ~ + 125 ;
Humidity: 10%-90% non-condensing

 

 

ESP8266 Develop Board

 

Description

Wireless Wifi Module

Condition: New

ESP8266 minimum system

Could use GPIO 9 way, AD, PWM, TIMER, 2 way UART, SPI, I2C, Watchdog

RAM Size: in Station mode, after connect the router, about 35k

ROM Size: no ROM, user programs in Spi Flash

High-speed CPU frequency (default 80 MHZ, up to 160 m)

Can be used as a serial port WIFI

Color is shown as pictures

Package included：

For sale is a ESP8266 Dev Board. The board contains the ESP8266 following components:

1. DHT11
2. RGB LED
3. Buzzer

4.more button

5. a plurality of switches

6.a relay

7. Poti
8. mini and micro USB connector

There are all the pins of the ESP8266 accessible it can be used the following interfaces:

1.ISP

2.PWM

3.9 I / O

5.AD

6.UART / Serial

7.I²C

8.timer

9.Watchdog

Particularly with the possibility to ESP8266 now used to directly program

the Arduino IDE is of course awesome! No Extra Arduino board needed !!!

 

 

ESP8266 WIFI Test board

 

Description:
Supporting the development of ways:
1 SDK development, internal leads all the IO ports
2 supports AT commands Development
Onboard STC15L204EA CPU, use this board without any downloading!
Directly using a mobile phone to control devices on the board, and the board can put the keys back to the cell phone test
Package including:
1pcs ESP8266 WIFI MODULE
1PCS TEST BOARD
1PCS 1A POWER SUPPLY
1PCS USB CABLE

 

ESP8266 Test Board

 

Description:
This board is suitable for firmware burning test of modules such as Anxin ESP-12S/12F/12E/07S/07 and so on,
All the IO ports have been extracted, which can be used as the minimum system development board or the small batch burning fixture.
Board supports firmware one click download function, and added burn.
Mode indicator (blue light) and serial communication indicator (green light).
Installed a serial chip CP2104 driver
Use the module that burned the firmware, and press the power switch, the red indicator light.
Package included:
1 x ESP8266 Test Board Burn Fixture