Advanced Solar Powered Wireless Perimeter Alarm System
Please Note this receiver
requires a wired internet connection (standard RJ45 ethernet
connection) and an iPhone for full app functionality.
The Advanced solar powered wireless perimeter alarm system is designed to help
you protect your family, home or business. It comprises of a
set of detection beams packed with quality features
(listed below) and advanced Milti Zone RJ45 Ethernet Internet Connected indoor receiver (full
details listed below), the beams have up to 100 yards detection
range, multi beam detection technology (to stops false alarms from
insects, small animals etc.) and up to 800 yards transmission range.
(All ranges are based on clear line of sight)
![](https://www.jex-electronics.com/images/product/jea-hbtcp.jpg)
Affordable & Versatile Security System
The system works by installing the perimeter beams (additional sets can
be added) in a location that you need to protect (The beams can be up to
100 yards away from each other). Plug the indoor receiver into a
standard wall socket (Up to 800 yards away from detection beams). When a
vehicle or person passes through the beams the receiver will alert you on your
phone and/or via local siren and activate any accessory connected to it. On the
phone App You can see which zone has been triggered and arm or disarm the alarm.
![](https://www.jex-electronics.com/ebay/images/alarm/alarm2.JPG)
Solar Powered Wireless Beam Detector:
-
Detector
Size: 340 (H) X 123 (W) X 45 (D) mm
-
Power
Supply: Re-Chargeable Batteries (Making For Easy Wireless
Installation)
-
Charging
Method: Built In Solar Panels (DC input on back for optional charging
options such as extra solar panels)
-
Multi
Detecting Beams: (Prevents False Alarms From Small Animals And Moving
Debris)
-
Detection
Range: 100 Yards Between Detectors (Line Of Sight)
-
Wireless
Range To Receiver: Impressive 800 Yards (Line Of Sight)
-
Quality
construction
-
Mounting
Methods: Supplied With Wall & Pole Mounting Brackets
-
Test Light:
(For Easy Installation, Actual Detector Beams Are Invisible To The Naked
Eye)
-
Frequency:
433 MHz
-
IP Rating:
Ip66
-
Distance
Between Detection Beams: 60mm
![](https://www.jex-electronics.com/ebay/images/alarm/alarmirs.jpg) ![](https://www.jex-electronics.com/ebay/images/alarm/alarmirs.jpg) ![](https://www.jex-electronics.com/ebay/images/alarm/alarmbrackets.jpg)
Advanced Wireless Control Panel:
-
4
Wireless Zone (can have multiple sensor on each zone)
-
Connects via standard JR45 Ethernet connection
to your homes internet (can connect to your modem directly or to your
internet router)
-
Top Quality Full Metal Construction
-
Lockable front door with tamper sensor
-
Wireless Alerts to your phone
-
Control the receiver via the Phone App
-
Battery backup (optional) for power outage or if thief cuts
power the alarm will still sound and function as normal.
-
Light Up LCD Display
-
Manual Set a schedule for arming and disarming of the alarm.
-
Receiver Size: 165 (W) X 175 (H) X 62 (D) mm
-
Power: 15v DC and optional 12V battery backup
-
TCP/IP RJ45 Standard Ethernet Connection
-
Built in Speaker
-
Frequency: 433 MHz FSK
-
Wireless Working Range: 800 Yards (Line Of Sight, Depending On
Which Detectors Are Being Used)
![](https://www.jex-electronics.com/ebay/images/alarm/alarmremote2s.jpg)
Easy to install:
The lack of power wiring needed for the Perimeter detectors means you
can place them in obscure out of the way places where power maybe
difficult to get to. The perimeter beams need to be mounted facing each
other, they are very easy to install as they have a built in red glow
light (for easy shorter length lining up) which illuminates for a while
after switching the beams on, after a while this light will
automatically switch off adding to your security.
The dual detection technology is made up of multiple detecting beams (60
mm apart), which need to be activated at the same time, before the alarm
signal is sent back to the receiver. This reduces false alarms
from small animals, leaves, debris, rain etc.
You
can add additional beams, sirens & indoor receivers to this system.
Easy Programming:
-
Turn on beams (Switch’s On Rear).
-
Mount the beams.
-
Line up by eye or string line / laser pen Etc for longer distances
-
Load the App, Put App in learning mode
-
Walk through the beams, at this time (providing you have them
correctly lined up) a bright red glow will illuminate.
-
The signal sent to the receiver from this set of beams will be
programmed into the relevant receiver.
-
The system is now ready.
|