Directions:
Please
apply only to a clean, dry, surface.
Below are some instructions on how to apply these stickers:
Step 1: Rub the sticker to be sure the transfer tape is
properly adhered to the sticker.
Step 2: Clean and dry the desired area. Stickers will
stick best to clean smooth surfaces.
Step 3: Remove the paper backing slowly making sure the
sticker stays adhered to the transfer tape
Step 4: Carefully position the sticker to the desired
area. Once the sticker sticks it will be nearly impossible to re-position
without destroying the sticker. Rub the sticker from one side to the other,
eliminating any air bubbles.
Step 5: Use a hard-edged object like a credit card to
make sure the entire sticker is fully adhered to the surface.
Step 6: Slowly remove the transfer tape. Making sure no
part of the sticker remains on the transfer tape.
Step 7 Check for air bubbles. In most cases air bubbles,
can be worked to the edge of the sticker, but if not, a pin hole will allow the
air out and become virtually invisible, once the bubble is gone