New Portable Digital Ultrasonic Thickness Gauge
with Menu Screen and Dual Resolution
APPLICATIONS:
THIS BRAND NEW 200 ultrasonic thickness gauge is a very handy portable, but powerful and versatile thickness tester for different kinds of metallic and non-metallic materials with two-range accuracy 0.1/0.01mm (.01/. 001 inch).
It can measure a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials, and also in special application, including for coarse grain material and high temperature applications with optional transducers.
FEATURES:
Ø Probe-Zero function, Sound-Velocity-Calibration function
Ø Two-Point Calibration function.
Ø Two work modes: Single point mode and Scan mode.
Ø Coupling status indicator showing the coupling status.
Ø Battery information indicates the rest capacity of the battery.
Ø Auto sleeps and auto power off function to conserve battery life.
Ø Optional software to process the memory data on the PC
Ø Optional thermal mini-printer to print the measured data via RS232 port
SPECIFICATIONS:
Ø Display:2X1 ¼” 128X64 dot matrix LCD with EL backlight.
Ø Measuring Range:.05-9” (1.2mm-230.0mm in Steel)
.03~11.8” (0.75~300mm) (in Steel with optional probes listed in Table)
Ø Sound Velocity Range: 1000~9999 m/s.
Ø Resolution:.01/. 001” (0.1/0.01mm) Two Selectable Ranges
Ø Accuracy: ±(0.5%Thickness+0.04)mm, depends on materials and conditions
Ø Units: Metric/Imperial unit selectable
Ø Four measurements readings per second for single point measurement, and ten per second for Scan Mode.
Ø Memory for up to 20 files (up to 99 values for each file) of stored values.
Ø Upper and Lower limit can be preset. It will alarm automatically when the measurement exceed the limit.
Ø Power Source Two “AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off).
Ø Communication:RS232 serial port.
Ø Dimensions:51/8 X3X1 ¼” (132×76×32 mm).
Ø Main Unit Weight:7.6 OZ (345g) without battery
Ø Extruded Aluminum body case for poor working conditions
Ø Operating Temperature: -4~140°F (-20~+60?);
Ø Storage Temperature: -22-158°F (-30?~+70?)
Ø Relative Humidity ≤90%;
STANDARD ACCESSORIES:
Ø 1 Main unit
Ø 1N05/90°Transducer .05-9” (1.2mm-230.0mm in steel)
Ø 1 Couplant Bottle (NO couplant due to the shipping & mailing regulation)
Ø 1 Carrying hard case
Ø 1 User’s operation manual
OPTIONAL ACCESSORIES:
Ø Transducers (see Table)
Ø Mini Thermal Printer
Ø Printer Cable
Ø Data Pro Software
Ø Communication Cable
Table: Transducer selection
Model | Frequency MHz | Diameter Inch (mm) | Measuring Range Inch (MM)(Steel) | Lower Limit Inch (mm) | Description |
N02 | 2 | .866 (22) | .118-11.8 (3.0-300.0) | .787 (20) | Thick, highly attenuating, or highly scattering materials |
N05 | 5 | .394 (10) | .047-9.055 (1.2-230.0) | .787X.118 (Φ20×3.0) | Normal Measurement |
N05 /90° | 5 | .394 (10) | .047-9.055 (1.2-230.0) | .787X.118 (Φ20×3.0) | Normal Measurement |
N07 | 7 | .236 (6) | .03-3.15 (0.75-80.0) | .59X.08 (Φ15×2.0) | For thin pipe wall or small curvature pipe wall measurement |
HT5 | 5 | .551 (14) | .118-7.874 (3-200) | 11.8 (30) | High temperature (lower than 572°F (300 ?) measurement. |
SUMMARY OF POLICIES
