Welcome to CEN
AudioControl LC2i 2 Channel RCA Line Out High to Low Converter with Accubass
2 CHANNEL ACTIVE LINE OUTPUT CONVERTER WITH ACCUBASS®
The LC2i allows for easy factory sound system upgrades without disturbing any factory features and functions. Adding aftermarket amplifiers and subwoofers to factory source units becomes simple. The LC2i is installed after the factory amplifier, so it can be added to any factory system. With AudioControl’s active speaker level inputs, you’ll get much better bass signal than with passive converters. AccuBASS® corrects factory bass roll-off by automatically engaging at the preset volume level, generating rock solid bass in just the right amount.
- Active Speaker Level Inputs
- AccuBASS® Bass Compensation Circuit
- Threshold and Boost Controls for AccuBASS® Optimization • GTOTM Signal Sense (no remote wire needed)
- Full Range Main Outputs
- Low Passed (1000 Hz) Bass Outputs
- 9.5 Vrms Output with Level Matching Controls
- Compact Size with Mounting Brackets
- Optional ACR-1 Dash Remote for Bass Level Control
High-quality line output converter
Looking for great sound from your factory radio? Would you like to upgrade your car's premium system? AudioControl's LC2i line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can be fed to another processor or amplifier. In other words, it lets you create an awesome car audio system without disturbing your factory controls or features.
Get your bass back
Some factory radios dial down the bass as you turn up the volume to protect their speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i with their AccuBASS™ circuitry that reverses the factory bass rolloff, giving you the bass you need to enjoy your music to the fullest. Place the LC2i between your factory system and your bass amp, and you'll hear a huge difference in bass response.
High-voltage signal for great sound
Some premium systems use multi-wire speaker cables for systems with multiple speakers. The LC2i features two speaker-level inputs that let you connect amplified signals up to 400 watts, including cables from Bose® and other premium factory systems. The LC2i then sends out a high-powered preamp signal — up to 9.5 volts RMS — that helps every amp perform to its maximum ability.
Convenience
The optional dash-mount remote control allows you to adjust the level of your sub channel on the go. The speaker-level inputs sense incoming signals and turn on the LC2i, while a built-in 12-volt trigger tells your amps or other gear to turn on when you start your car.
- Speaker Level Input: 1 (2 channels)
- Maximum Speaker Level Input: 400W per channel at 4Ω
- Input Impedance: 20kΩ
- Preamp Outputs: 2 (2 channels main, 2 channels bass)
- Maximum Output Level: 9.5Vrms/13V peak
- Output Impedance: 150Ω
- Total Harmonic Distortion: 0.01%
- Signal to Noise: >110 dB
- Frequency Response: 33 Hz – 100 kHz ±1 dB
- Remote In
- 12VDC Remote Out (always active when unit is on)
- Current Draw: 150mA
- Recommended Fuse Rating: 1A
- weights & dimensions
- Dimensions: 5.4″L x 3.25″D x 1.5″H (6.5″L including mounting brackets)
- Weight: 1.0lbs (0.5kg)
- LC2i
- Speaker and Power connectors
- Manual