Welding Combo Kit for Mobula7 Upgrade Crazybee F4 Pro Flight Controller + Caddx 1200TVL FPV Camera & Switchable VTX + New Canopy V2
There are 2 kinds of Combo Kit optional, The electronic parts are well welded and tested. Please choose the version you request.
The Flight Controller compatible with DSM2/DSMX / Frsky / Flysky, Please choose the version according to your Remote Controller.
Warm Tips:This product is not soldered. If you need to solder, please leave a message for me.
Package include: (Upgrade combo)
1 x Crazybee F4 PRO flight controller (for Frsky or for DSM2/DSMX or for Flysky)
1 x 5V Buzzer Alarm Beeper
1 x Caddx.us Turbo EOS2 1200TVL 2.1mm 1/3 CMOS Mini FPV Camera
1 x 5.8g 40ch 25mw~200mw switchable VTX
1 x Camera Angle adjustable Canopy V2 Red
1 x Battery Holder Protection Seat Black TPU 3D Printing
1 x Relative Cables
Package include: (Basic combo)
1 x Crazybee F4 PRO flight controller (for Frsky or for DSM2/DSMX or for Flysky)
1 x 5V Buzzer Alarm Beeper
1 x Caddx.us Turbo EOS2 1200TVL 2.1mm 1/3 CMOS Mini FPV Camera
1 x 5.8g 40ch 25mw~200mw switchable VTX
| Crazybee F4 Pro Flight Controller |
(Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEE F4FS PRO V2.0 Firmware target: CrazybeeF4FS (DSM2/DSM-X version) CRAZYBEE F4DX PRO V2.0 Firmware target: CrazybeeF4DX (No RX version) CRAZYBEE F4 PRO V2.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Board size: 28.5 * 28.5MM Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) DSM-2/X Version built-in Serial-based DSM-2/DSM-X compatible satellite receiver No RX version need to add external Receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter Built-in voltage detection |
| Onboard 4 In 1 ESC |
MCU upgraded to EFM8BB21
Power supply: 1-3S LiPo/LiPo HV (3.5v/13v) |
| Onboard Frsky NON-EU receiver Version |
SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
|
Onboard Frsky EU-LBT Version (External XM+ receiver) |
Operating Voltage Range: 3.7~10V |
| Onboard Flysky receiver Version |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
|
Onboard DSM-2 / DSM-X receiver version |
Serial bus receiver Protocol: DSM-2/DSM-X compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
|
Canopy |
Angle adjustable Canopy V2 |
|
CADDX Turtle V2 Camera |
Image sensor: 1/2.7" CMOS sensor Horizontal: 800TVL TV system: NTSC/PAL changeable Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps Power Input: DC 4.5-20V FPV FOV: 155° Recording FOV: 170° Mini Illumination: 0.01lux Image Resolution: 2 Megapixels Lens: 1.8mm Turbo Eye Lens Working Current: 380mA@5V/160mA@12V (low consumption) OSD Menu: Yes (Support Voltage Display) Video Files: MP4 Audio: Support Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II) Color: Red |
|
VTX |
Output power: 25~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready Weight: 3g |
|
Battery Holder |
Black TPU 3D Printing |
- Unit Type: Set
- Package Weight: 0.115kg (0.25lb.)
- Package Size: 5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in