Description
MACH3 USB 3-Axis CNC Kit TB6560 Stepper Motor Driver Board + 3pcs Nema23 Stepper Motor57+1pc Power
Package Content:
- 3 x Nema 23 Stepper Motors 57
- 1 x USB MACH3 CNC 3 axis TB6560 Stepper Motor Driver Board
- 1 x Power
- 1 x USB cable
- 1 x CD
Motor Controller:
- USB mach3 CNC 3 axis TB6560 Stepper Motor Driver Board
- Motor type: Stepper Motor
- Model Number: mach3 USB 3 axis
- Frequency: 100KHZ
Features:
1. Support for 3-axis linkage, you can connect four stepper motor drives or servo drives.
2. Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.
3. 3 general-purpose opto-couplers isolation input: can connect the limit switch, emergency stop switch, home switch etc.
5. Support for connecting electronic handwheel.
6. Have 0-10V signal output, you can use mach3 software to control the spindle motor speed.
7. 3 general-purpose isolated relay drive output interface, can drive three relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
8. 1 status LED, indicate connection status on the board.
9. Resolution 1, 12, 18, 116 micro stepping output.
10. Four (or three) channels 3.5A adjustable output current for 2/4 phase bipolar stepper driver.
11. Build with 4 outputs and 5 inputs.
Nema 23 Stepper Motor 57:
- Step Angle (degrees): 1.8 deg.
- Holding Torque: 1.8Nm
- Phase: 2
- Current / Phase: 4
- Size: 57*57*76
Package Content:
- 3 x Nema 23 Stepper Motors 57
- 1 x USB MACH3 CNC 3 axis TB6560 Stepper Motor Driver Board
- 1 x Power
- 1 x USB cable
- 1 x CD
Motor Controller:
- USB mach3 CNC 3 axis TB6560 Stepper Motor Driver Board
- Motor type: Stepper Motor
- Model Number: mach3 USB 3 axis
- Frequency: 100KHZ
Features:
1. Support for 3-axis linkage, you can connect four stepper motor drives or servo drives.
2. Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.
3. 3 general-purpose opto-couplers isolation input: can connect the limit switch, emergency stop switch, home switch etc.
5. Support for connecting electronic handwheel.
6. Have 0-10V signal output, you can use mach3 software to control the spindle motor speed.
7. 3 general-purpose isolated relay drive output interface, can drive three relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
8. 1 status LED, indicate connection status on the board.
9. Resolution 1, 12, 18, 116 micro stepping output.
10. Four (or three) channels 3.5A adjustable output current for 2/4 phase bipolar stepper driver.
11. Build with 4 outputs and 5 inputs.
Nema 23 Stepper Motor 57:
- Step Angle (degrees): 1.8 deg.
- Holding Torque: 1.8Nm
- Phase: 2
- Current / Phase: 4
- Size: 57*57*76
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
