High quality automatic cleaning pressurised pond filters
with UV sterilisers suitable for ponds up to 80,000 litres. PLEASE NOTE: These
filters are provided WITHOUT pump, so a suitable pump must be used to pump
water into the filter via a hose. We sell suitable pumps separately if required.
These
are one of the most advanced pond filters on the market today. They are auto
cleaning, so full strip down cleaning of the pond filter is not required as
often.
These filters are available in a choice of 8 sizes to suit
all sizes of ponds. Please see details below for detailed specifications for
each model.
Filter
Features:
New pond filter generation:
Indicator for pollution
High flow rate
Optimum development of biological pond filter
Easy and uncomplicated bio-pressure pond filter-system
This system provides fast and reliably clear water
Easy backwashing (by flipping a switch)
Different filter materials (special filter foams)
Advantages:
Mechanical and biological pressure filter with integrated
UVC-clarifier. All connections and technology are in the lid/cover, the filter
can be buried to lid for concealment without difficulty. Flush back function
with maintenance indicator.
Cleaning
and maintenance:
The water can be pumped to a higher lying waterfall and
then led back into the pond. The annual maintenance is limited to checking the
filter media and the UV-lamp. The filter has a modern flush back function that
can be adjusted by means of a switch with two functions. With the switch you
have the following possibilities for setting:
The
EasyClean flush back function:
• Switch position "Filter"
Normal operation - the water passes through the pressure
pond filter with the help of a pond pump and returns cleanly into the pond.
• Switch position "Clean"
Cleaning mode - By turning the switch the motor that is
integrated in the top of the filter is switched on and makes the filter sponges
rotate in the inner of the pond filter and cleans them from the coarse dirt
without opening the pond filter. During the cleaning operation the dirty water
is drained by an additional connection and can be used for example for garden
irrigation.
Filter
Placement:
The filter is placed at the pond side and by means of a a
suitable pump (not included in delivery) connected with the water. The water
circulates through the filter and the UV-device and after being cleaned is led
again into the pond.
Fundamental
Functionality:
Pond filter combine the mechanical and biological cleaning.
Microorganisms settle on the filter material and remove germs and bacteria from
the water. By mechanical filtering, suspended particles and dirt remain in the
pond filter and by this means no longer return to the pond water.
It takes about 4-6 weeks, until Filter Bacteria have sufficiently
colonized the bio pond filter. Only thereafter it is advisable to switch on a
UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a
new filter. Starter bacteria refer to microorganisms especially grown in a
laboratory. By adding them, you can shorten the start-up phase considerably.
Bacteria are active above a temperature of approximately 10°-12°C, the pond
filter´s temperature should exceed 40°C. So, the pond filter should be placed
in the shadow and not be exposed to direct sunlight.
UVC-pond clarifiers irradiate the water in a flow-through
reactor with UV rays. The UV-C radiation destroys the swimming algae. The algae
agglutinate to large particles and ca be easily removed by means of mechanical filtering.
Our UVC clarifiers modify the tertiary and the quaternary structure of the
algae proteins by means of UV-radiation. This means the destructions of the
algae which can be removed from the water by pond filters.
Although
the photographs show EU plugs, these filters are full UK models and are
supplied with 3 pin UK plugs.
Model
Specifications:
Model: CPA-2500
Max Flow Rate: 6000l/h
Hose Adapter Size: ¾” to 1 ¼”
Suitable pond volume for ponds with fish: 3000 Litres
Suitable for decorative ponds 6000 Litres
UV Clarifier Power: 11w
Actual filter volume in litres: 16 Litres
Dimensions: 310 x 310 x 405mm
Model: CPA-5000
Max Flow Rate: 7000l/h
Hose Adapter Size: ¾” to 1 ¼”
Suitable pond volume for ponds with fish: 4000 Litres
Suitable for decorative ponds 8000 Litres
UV Clarifier Power: 11w
Actual filter volume in litres: 20 Litres
Dimensions: 310 x 310 x 495mm
Model: CPA-5000
Max Flow Rate: 9000l/h
Hose Adapter Size: ¾” to 1 ½”
Suitable pond volume for ponds with fish: 4000 Litres
Suitable for decorative ponds 8000 Litres
UV Clarifier Power: 11w
Actual filter volume in litres: 20 Litres
Dimensions: 380 x 380 x 410mm
Model: CPA-10000
Max Flow Rate: 10000l/h
Hose Adapter Size: ¾” to 1 ½”
Suitable pond volume for ponds with fish: 6000 Litres
Suitable for decorative ponds 12000 Litres
UV Clarifier Power: 11w
Actual filter volume in litres: 25 Litres
Dimensions: 380 x 380 x 520mm
Model: CPA-15000
Max Flow Rate: 10000l/h
Hose Adapter Size: ¾” to 1 ½”
Suitable pond volume for ponds with fish: 15000 Litres
Suitable for decorative ponds 20000 Litres
UV Clarifier Power: 18w
Actual filter volume in litres: 38 Litres
Dimensions: 380 x 380 x 730mm
Model: CPA-20000
Max Flow Rate: 12000l/h
Hose Adapter Size: ¾” to 2”
Suitable pond volume for ponds with fish: 20000 Litres
Suitable for decorative ponds 40000 Litres
UV Clarifier Power: 36w
Actual filter volume in litres: 50 Litres
Dimensions: 450 x 450 x 550mm
Model: CPA-30000
Max Flow Rate: 12000l/h
Hose Adapter Size: ¾” to 2”
Suitable pond volume for ponds with fish: 30000 Litres
Suitable for decorative ponds 60000 Litres
UV Clarifier Power: 55w
Actual filter volume in litres: 75 Litres
Dimensions: 450 x 450 x 715mm
Model: CPA-50000
Max Flow Rate: 13000l/h
Hose Adapter Size: ¾” to 2”
Suitable pond volume for ponds with fish: 40000 Litres
Suitable for decorative ponds 80000 Litres
UV Clarifier Power: 55w
Actual filter volume in litres: 170 Litres
Dimensions: 600 x 600 x 815mm