Deutsch,
Englisch, Niederländisch, Französich & Spanisch
Das OBD Diagnosegerät CR Pro wurde speziell für 43 Fahrzeugmarken entwickelt. Es dient zur schnellen Analyse der Fehlerspeicher von Motor, Getriebe, ABS, Airbag und vielen anderen Steuergeräten wie sie in allen neueren Fahrzeugen verbaut sind. Unser Angebotenes OBD Diagnosegeräte Modell CR Pro ist ein hochwertiger Scanner. Dieses professionelle Diagnosegerät benötigt keinen Computer. Der Anschluss erfolgt nur über das Einstecken in die Diagnosebuchse im Fahrzeug und das Gerät ist umgehend betriebsbereit. Das Auslesen der Fehlerspeicher ist somit sehr einfach. Die Fehler werden direkt auf dem Farbdisplay angezeigt. Die Anzeige erfolgt als Klartext und Fehlercode. Durch die einfache Bedienung mittels neun Tasten ist das Gerät sehr einfach zu bedienen und für jeden Laien geeignet. Dieses Professionelle Diagnosegerät für den kleinen Geldbeutel hilft Ihnen bei der Fahrzeugdiagnose.
iCarsoft CR Pro für: |
||||
Mercedes |
Sprinter |
Smart |
BMW |
Mini |
Porsche |
Audi |
VW |
Seat |
Skoda |
Volvo |
SAAB |
Land Rover |
Jaguar |
Opel |
Peugeot |
Citroen |
Renault |
Dacia |
Vauxhall |
Fiat |
Alfa-Romeo |
GM |
Chrysler |
Jeep |
EU Ford |
US Ford |
AU Ford |
Holden |
Toyota |
Infiniti |
Lexus |
Scion |
Honda |
Acura |
Nissan |
Subaru |
Mazda |
Mitsubishi |
Isuzu |
Hyundai |
Kia |
Daewoo |
|
|
Das CR Pro kann Live Daten während des Betriebes Lesen. Die Live Anzeige von Sensordaten ist Umschaltbar,
so das alle relevanten Daten in verschiedenen Anzeigen dargestellt werden, wie z.b.:
• die Temperatur der angesaugten Luft
• Luftmasse / Luftdurchsatz
• Motordrehzahl
• Fahrzeuggeschwindigkeit
• Position O2 Sensor
• Kühlmitteltemperatur
• Langsame Korrektur
• Schnelle Korrektur ........
Je nach verwendetem Fahrzeug werden noch andere Live Daten zur Verfügung gestellt.
Vorteile die Überzeugen:
• Verwendbar bei Europäische Autos Farhrzeugen
• Einfach abzulesendes Farb Display
• Liest alle Fehlercodes (Generelle und Hersteller spezifische Codes)
• Löscht alle Codes im Steuergerät
• Service Intervallanzeigen Reset
• Zugriff auf das EPB System
• Batterieanlern Funktion
• Batteriespannungstest mit min max Anzeige
• Zugriff auf das DPF System
• Zugriff auf den Lenkwinkelsensor inkl. Kalibrierfunktion
• Live Data Funktion
• Einfache Bedienung über neun Tasten
• Stand Alone Gerät, keine Batterien oder Laptop notwendig
• Updatefähig via Internet
Technische Daten
• Abmessung ~ 205 x 105 x 30 mm
• Kabellänge ~ 600 mm
• Display : LCD Farbe mit Hintergrundbeleuchtung
• Spannungsbereich: 12Vdc, direkt über die OBD Schnittstelle
• Steckertyp: Genormter 16 pol. OBD Stecker
• Gehäuse: Kunststoff
• Unterstütze OBD II Kommunikationsprotokolle: J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4, ISO 15765 (CAN)
Lieferumfang
• OBD Diagnosegerät Modell CR Pro
• 16 pol OBD Kabeladapter
• Transporttasche
• Bedienungsanleitung / Technische Dokumentation
• USB Kabel
iCarsoft Professional Multi-system Auto Diagnostic Tool CR PRO
iCarsoft CR Pro is a Professional and powerful vehicle fault diagnosis tool for
multi-brand vehicles (more than 40 kinds of vehicle marks) developed by
iCarsoft Technology Inc. With a 4.0” TFT LCD and unique diagnostic software, it
features full ECU diagnosis of most vehicle brands and test modes mainly
include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to
accurately diagnose complex problems.
iCarsoft CR Pro designed for: |
||||
Mercedes |
Sprinter |
Smart |
BMW |
Mini |
Porsche |
Audi |
VW |
Seat |
Skoda |
Volvo |
SAAB |
Land Rover |
Jaguar |
Opel |
Peugeot |
Citroen |
Renault |
Dacia |
Vauxhall |
Fiat |
Alfa-Romeo |
GM |
Chrysler |
Jeep |
EU Ford |
USFord |
AU Ford |
Holden |
Toyota |
Infiniti |
Lexus |
Scion |
Honda |
Acura |
Nissan |
Subaru |
Mazda |
Mitsubishi |
Isuzu |
Hyundai |
Kia |
Daewoo |
|
|
Product Features: (varies across car model and year)
• iCarsoft CR Pro can do it
all-reads and clears trouble codes on most of the systems such as engine,
transmission, ABS and Airbag etc.
• Support OBDII/EOBD Ten Modes of Operation.
• Read Live Data.
• Full ECU Diagnosis.
• Applies to most of the vehicle models which equipped with OBDII-16 DLC.
• Easy To Use with Silicone Keys.
• Oil Light/Service Reset: Support service lamp reset.
• Electronic Parking Brake (EPB) system maintenance deactivates and
reactivates the EPB system for replacement and initialization.
• Battery Management System (BMS), registers new battery to the BMS while
battery replacement.
• Diesel Particulate Filter (DPF) regeneration control system, requests
the DPF regeneration process while DPF blockage and turn off the DPF
indicator.
• Electronic Throttle Control system (ETC) relearns the throttle valve
control value while clear or replaces the throttle valve.
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel
to straight ahead, or recalibrates SAS while steering part replacement.
• ABS Bleeding.
• Injector programming.
• The Print Data function allows you printing out diagnostic data recorded
by the scan tool or customized test reports.
• Battery test allows you getting the voltage of battery with OBD port by
the scan tool when the engine starts.
• DTC Library to lookup when user is operating this tool.
• Upgrade via PC.
• Multi-language: English, German, Dutch, Spanish, French.
Special functions:
*** Varies across year and model ***
CR PRO allows you to
reset Oil Service in a click of a button on supported vehicles. On vehicles
where a manual reset is required, the tool will guide you through the full
process step-by-step.
EPB Reset Function
Electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systems safely and effectively.
The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.
Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot.
Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. The iCarsoft CR PRO will allow you to carry out steering angle re-calibration on supported models.
Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.
Battery Management System (BMS), registers new battery to the BMS while battery replacement.
OBDII FUNCTION
1.
Read Codes
2.
Erase Codes
3.
I/M Readiness -- I/M Readiness indicate whether or not the various
emissions-related systems on the vehicle are operating properly and are ready
for Inspection and Maintenance testing.
4.
Data stream.
5.
Freeze Frame -- When an emission-related fault occurs, certain vehicle
conditions are recorded by the on-board computer. This information is referred
to as freeze frame data. Freeze Data is a snapshot of the operating conditions
at the time of an emission-related fault.
6.
O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test
results for most recently performed tests from the vehicle's on-board computer.
7.
On-Board Monitoring -- This function can be utilized to read the results of
on-board diagnostic monitoring tests for specific components/systems.
8. Evap System
Test -- The EVAP test function lets you initiate a leak test for the vehicle's
EVAP system. Before using the system test function, refer to the vehicle's
service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number
(VIN), the calibration verification number (CVN), and other information of the
test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and
U1) codes and pending codes
11.Turn
off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18.
Supports most of the OBDII/EOBD test modes include: CAN, ISO9141,
KWP2000,
J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate
for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More
SPECIFICATIONS:
Display: 4.0″TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 260*190*65 mm (L x W x H)
CONTENTS:
CR PRO Main Unit
Main Cable
Data Cable
TF Card
User Manual
Nylon carry case
Wir sind nicht für irgendwelche Arbeitskosten, die entstehen, wenn es irgendwelche Probleme mit dem Teil wieder eingebaut, nicht verantwortlich.