iCarsoft JP V2.0 für: | |||
Toyota | Lexus | Scion | Isuzu |
Infiniti | Nissan | Mitsubishi | Honda |
Acura | Mazda | Subaru |
|
Das OBD Diagnosegerät JP V2.0 wurde speziell für Japanische Fahrzeuge entwickelt. Es dient zur schnellen Analyse der Fehlerspeicher von Motor, Getriebe, ABS, Airbag und vielen anderen Steuergeräten wie sie in allen neueren Fahrzeugen verbaut sind. Unser Angebotenes OBD Diagnosegeräte Modell JP V2.0 ist ein hochwertiger Scanner. Dieses professionelle Diagnosegerät benötigt keinen Computer. Der Anschluss erfolgt nur über das Einstecken in die Diagnosebuchse im Fahrzeug und das Gerät ist umgehend betriebsbereit. Das Auslesen der Fehlerspeicher ist somit sehr einfach. Die Fehler werden direkt auf dem Farbdisplay angezeigt. Die Anzeige erfolgt als Klartext und Fehlercode. Durch die einfache Bedienung mittels neun Tasten ist das Gerät sehr einfach zu bedienen und für jeden Laien geeignet. Dieses Professionelle Diagnosegerät für den kleinen Geldbeutel hilft Ihnen bei der Fahrzeugdiagnose.
Das JP V2.0 kann Live Daten während des Betriebes Lesen. Die Live Anzeige von Sensordaten ist Umschaltbar, so das alle relevanten Daten in verschiedenen Anzeigen dargestellt werden, wie z.b.:
• die Temperatur der angesaugten Luft
• Luftmasse / Luftdurchsatz
• Motordrehzahl
• Fahrzeuggeschwindigkeit
• Position O2 Sensor
• Kühlmitteltemperatur
• Langsame Korrektur
• Schnelle Korrektur ........
Je nach verwendetem Fahrzeug werden noch andere Live Daten zur Verfügung gestellt.
Vorteile die Überzeugen:
• Verwendbar bei Fiat und Alfa Romeo Fahrzeugen
• Einfach abzulesendes Farbe Display
• Liest alle Fehlercodes (Generelle und Hersteller spezifische Codes)
• Löscht alle Codes im Steuergerät
• Service Intervallanzeigen Reset
• Zugriff auf das EPB System
• Batteriespannungstest mit min max Anzeige
• Zugriff auf das DPF System
• Zugriff auf den Lenkwinkelsensor inkl. Kalibrierfunktion
• Live Data Funktion
• Einfache Bedienung über neun Tasten
• Stand Alone Gerät, keine Batterien oder Laptop notwendig
• Updatefähig via Internet
Technische Daten
• Abmessung ~ 205 x 105 x 30 mm
• Kabellänge ~ 600 mm
• Display : LCD Farbe mit Hintergrundbeleuchtung
• Spannungsbereich: 12Vdc, direkt über die OBD Schnittstelle
• Steckertyp: Genormter 16 pol. OBD Stecker
• Gehäuse: Kunststoff
• Unterstütze OBD II Kommunikationsprotokolle: J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4, ISO 15765 (CAN)
Lieferumfang
• OBD Diagnosegerät Modell JP V2.0
• 16 pol OBD Kabeladapter
• Transporttasche
• Bedienungsanleitung / Technische Dokumentation
• USB Kabel
iCarsoft Professional Multi-system Auto Diagnostic JP V2.0 for Japanese car makes
iCarsoft JP V2.0 is a Professional and powerful Japanese car fault diagnosis tool developed by iCarsoft Technology Inc. With a 4.0” TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle make and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850etc.
iCarsoft JP V2.0 designed for: |
|||
Toyota |
Lexus |
Scion |
Isuzu |
Infiniti |
Nissan |
Mitsubishi |
Honda |
Acura |
Mazda |
Subaru |
|
Product Features (varies across car model and
year):
1.
iCarsoft JP V2.0 can do it all-reads and
clears trouble codes on most of the systems such as engine, transmission, ABS
and airbag etc.
2.
Applies to the single Brand of most models of
European vehicles which equipped with OBDII-16 DLC
3.
Support OBDII/EOBD Ten Modes of Operation
4.
Full System Diagnosis
5.
Read &Clear DTC
6.
Read Live Data
7.
Support special functions: Oil Service Reset,
EPB Reset, DPF reset, SAS Reset, ETCs reset, BMS Reset, ABS Bleeding, Injector
programming.
8.
Support Data Review
9.
The Print Data function allows you printing
out diagnostic data recorded by the scan tool or customized test reports.
10.
Battery test allows you getting the voltage
of battery with OBD port by the scan tool when the engine starts.
11.
DTC Library to lookup when user is operating
this tool.
12.
Easy To Use With Silicone Keys
13.
Full Speed Upgrade Via USB2.0
14.
4.0″TFT LCD, 480*320 Pixels
15. Multi-language: English, German, Dutch, Spanish, French.
Special functions:
*** Varies
across year and model ***
EU PRO allows you
to reset Oil Service in a click of a button on supported vehicles. On vehicles
where a manual reset is required, the tool will guide you through the full
process step-by-step.
EPB
Reset Function
Electric parking brake (EPB) function has a multitude of
uses to maintain the electronic braking systems safely and effectively.
The applications include deactivating/activating the
brake control system, assisting with brake fluid control, brake diagnostics,
opening and closing brake pads, setting brakes after disc or pad replacement
and also reading and clearing EPB/SBC trouble codes. It is also capable of
retrieving Fault Codes information from the ECU.
Carry out a forced Diesel Particulate Filter (DPF)
Regeneration on supported vehicles - this MUST be done by trained personnel.
Required when the DPF filter blockage reaches levels where passive or active
regeneration is unable to burn off the excess soot.
Steering Angle Sensor (SAS) is used to measure the angle
of the steering wheel and the speed at which it is being turned. The signal is
mainly used by the ABS System as part of it's stability control function but
also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a
fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed,
many vehicles require the new sensor to be calibrated. The iCarsoft EU PRO will
allow you to carry out steering angle re-calibration on supported models.
Electronic Throttle Control system (ETC) relearns the
throttle valve control value while clear or replace the throttle valve.
Battery
Management System (BMS), registers new battery to the BMS while battery
replacement.
OBDII FUNCTION
1. Read
Codes
2. Erase
Codes
3. I/M
Readiness -- I/M Readiness indicate whether or not the various
emissions-related systems on the vehicle are operating properly and are ready
for Inspection and Maintenance testing.
4. Data
stream.
5. Freeze
Frame -- When an emission-related fault occurs, certain vehicle conditions are
recorded by the on-board computer. This information is referred to as freeze
frame data. Freeze Data is a snapshot of the operating conditions at the time
of an emission-related fault.
6. O2
Sensor Test -- This option allows retrieval and viewing of O2 sensor test
results for most recently performed tests from the vehicle's on-board computer.
7.
On-Board Monitoring -- This function can be utilized to read the results of
on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test
function lets you
initiate a leak test for the vehicle's
EVAP system. Before
using the system test function, refer
to the vehicle's service
repair manual to determine the
procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number
(VIN), the calibration verification number (CVN), and other information of the
test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and
U1) codes and pending codes
11.Turn
off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18.
Supports most of the OBDII/EOBD test modes include: CAN, ISO9141,
KWP2000,
J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate
for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More
SPECIFICATIONS:
Display: 4.0″TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 260*190*65
mm (L x W x H)
CONTENTS:
JP V2.0 Main Unit
Main Cable
Data Cable
TF Card
User Manual
Nylon carry case
Wir sind nicht für irgendwelche Arbeitskosten, die entstehen, wenn es irgendwelche Probleme mit dem Teil wieder eingebaut, nicht verantwortlich.