Genuine DuPont Mylar 190 micron Sheet(s)
Food and Laser Safe
Please note Mylar is NOT clear transparent - it is semi-transparent with a milky finish
Ideal for decorating, shabby chic, stencilling and dozens of craft uses
Can be used inside laser cut illuminated displays
Dozens of uses.
Accepts paint very well
Cut with scissors, scalpel, laser cutter (very fast! I can help with settings)
CAN I CUT THIS ON A CRICUT CAMEO OR BROTHER SCAN N CUT?
I have a brother Scan N Cut cm900 and it whizzes through that - if you have a look at my shop you'll see all the designs I sell
I have seen proof it cuts very well on newer models of the Brother machine using auto blade
Update - we just got a SDX2050dx and it whizzes through that also - usually makes two passes on the autosetting but the precision is exact and although it takes a little longer - cut is sharp and clean. We use a low tack mat and tape the corners.
Other makes I get mixed reports about - samples are cheap
Same day dispatch (Mon-Fri before 3pm)
FREE UK delivery (2nd Class)
You will get 5 sheets of A4 Sheet size - 210mm x 297mm in 190 micron - far better than 125 micron - lasts MUCH longer
Larger sizes available up to 1 metre wide and any length
(contact us)
Please note the other images are just to show the level of detail attainable with this 190 micron Mylar
This listing is just for the blank sheets
Product Description
Mylar® HS is an uncoated, transparent polyester film designed for heat shrinkapplications. It is commercially available in nominal 48, 65, 80 and 150 gauges.General Product InfoUnlike most PET films, Mylar® HS is not heat stabilized and will shrink with considerableforce when exposed to heat. Immersion of the film in boiling water will produceapproximately 50 percent shrinkage. Because of its sensitivity to heat, special care mustbe exercised during any converting operation involving heat or drying to avoidunwanted premature shrinkage of Mylar® HS.Special FeaturesAll gauges of Mylar® HS can be supplied with corona treatment for improved bonding toinks and adhesives. DuPont Teijin Films offers this as Mylar® HST. The corona treatedside is normally wound toward the core, however, this can be reversed upon request.Typical ApplicationsAdhesive seamed, heat shrinkable tubing and contour bottom heat shrinkable bagsmade from unsupported Mylar® HS, and heat shrinkable heat sealed tubing and bagsmade from laminations of Mylar® HS and a suitable sealant web, are used for thepackaging of poultry, meat and fish products.ApprovalsFDA Food Contact Status - All gauges of Mylar® HS comply with the Food and DrugAdministration regulation 21 CFR 177.1630 -- Polyethylene phthalate polymers. Thisregulation describes films which may be safely used in contact with all types of foodexcluding alcoholic beverages. Uncoated films such as Mylar® HS can be used to containfoods during oven cooking or oven baking at temperatures above 250°F.UL Recognition - Product has been registered with Underwriters LaboratoriesDisposalDispose of in compliance with federal, state and local regulations. Preferred options fordisposal are (1) recycling, (2) incineration with energy recovery, and (3) landfill. Thehigh fuel value of this product makes option No. 2 very desirable for material whichcannot be recycled.