6-60V 12V/24V Battery Charging Control Board Charger Power Supply Switch Module
1.XH-M603 Charging Control Module 12-24V
 
Product Introduction:
1.Model:XH-M603
2.Input Voltage:DC 10-30V 
3.Display Precision:0.1V 
4.Control Precision:0.1V 
5.Output Type:direct output 
6.Voltage Tolerance:+/-0.1V 
7.Application Fields:12-24V storage battery 
8.Size;82*58*18mm
2.XH-M604 Battery Charger Control Module DC 6-60V

Product Introduction:

1.Name:numerical control battery charging control module 
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output 
7.Voltage Tolerance:+/-0.1V 
8.Application Fields:6-60V storage battery 
9.Size:81*54*18mm
 
Using Method:
1.Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value 
2.Set Stop Voltage:in normal display voltage state,press the button will display stoping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stoping charge voltage value
3.Factory Reset:in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings 

3.XH-M602  Control Battery Charging Control Module AC 220V

Product Introduction:
1.Name:numerical control battery charging control module 
2.Model:XH-M602
3.Input Voltage:AC 220V 
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:output switch 
7.Voltage Tolerance:+/-0.1V 
8.Application Fields:for 3.7-120V lithium battery or storage battery 
9.Size:86*58*24mm

4.XH-M601 Battery Charging Control Board 12V
 
Product Introduction:
1.Name:12V charger power control board 
2.Model:XH-M601
3.Power Supply Voltage:13.8-14.8V 
4.Relay Operating Voltage:12.4V 
5.Relay Disconnect Voltage:14.8V
6.Voltage Tolerance:+/-0.1V
7.Voltage Detection Way:DC voltmeter 
8.Charging Type:12V storage battery 
9.Potentiometer Adjustment:RP1 RP2 
10.Size:50*32*18mm
Potentiometer Adjustment:
1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)
2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)

Package Included:
1PCS

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction. Then we will improve our service immediately.
It is impossible to address issues if we do not know about them.

1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.

  • We only accept payment through Paypal.
  • Items will go to post within 1-2 business days after payment confirmed.

If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

On 27-Aug-19 at 07:42:19 BST, seller added the following information:

DataCaciques