Bull-it SR6 Cargo Pants-Black-32 Long
The Bull-it SR6 Cargo Pants have a slim fit at the waist, hips and thigh. These straight leg jeans are suitable for inside or outside any boot, and there is a calf zipper that allows easy on/off of boots. SR6 refers to the amount of abrasion resistance. SR6=6.26 seconds of abrasion protection. Compare this with 1.4MM cowhide's 5.8 seconds of abrasion resistance, and you'll agree that the Bull-it SR6 Jeans set a higher standard. Add in a water repellent finish, and you'll find yourself reaching for the Bull-it SR6 Jeans whenever you ride.
Fit:
- Runs about 2" small in the waist, select the next size up from what you normally wear in jeans
- Straight leg
Features:
- 12.5oz cotton twill
- Multiple Cargo-style pockets: 2 front, 2 rear with closures and 2 side
- Rear center shaped belt hoop with embroidered Bull-it logo
- Covec sew in label in rear right hand pocket
- Genuine YKK locking front zipper
- Inside waistband with Bull-it branded printing
- UV laminate protector inside
- Micro climate inside with 1mm of airflow using Covec structure and cool mesh liner, keeps you warm when it’s cold and cool in the summer
- Covec thermal barrier inside prevents heat transfer from road friction
- 60% internal cover of Covec impact abrasion prevention layer
- Knee and hip armor pockets for optional CE approved protectors (sold separately)
- Water repellent finish
SR6: The mid-level SR6 jeans use the Covec SR6 liner, these jeans are tested to and certified CE EN 13595-1 Level 1 Clause 5.4 for abrasion resistance with 6 seconds in all relevant zones.
Covec Explained:
- Bull-it SR4, SR6 and VoloCE products use Covec materials and are tested to achieve a specific level of performance in areas Bull-it believes are important to the rider, that's pretty much all the usual impact areas and not just the zones required for certification, for VoloCE there is 100% coverage. For SR4 50% and SR6 60%. This is already over and above the amount a lot of bike jeans have, that's why the competition have stitch panels all over the thighs, seat and knees, to use as little protective material as they can get away with, some use even less just to say its in there at all.
- Covec provides low thermal conductivity and a high melting point, preventing additional consequential burns in a crash scenario. Clearly materials with high heat conductivity and low melting point like UHMWPE are less suitable in situations where heat is produced due to friction against abrasive road surfaces. Any product may incorporate high performance fibers and yarns but its performance will be defined in certain circumstances by the lowest common denominator in any given situation.
- The five-layer laminated construction of Covec allows for a thermal barrier to extreme weather conditions, in hot weather the heat of the day is held at bay by the natural low thermal performance of Covec and the micro-climate created by the channeling in the fabric. This also works in cold weather keeping the body temperature inside the jeans and the cold out.