ALKO 6 INCH GALVANISED HUB FORD STUD PATTERN HOLDEN LM BEARINGS
6" Gal Hub - Ford - Chinese LM Bearings - Marine Seal
Part Number: 441282G
6” Galvanised Hub Kit, Ford Stud Pattern (5x 4.5” (114.3mm) PCD)
Fitted with 1/2” UNF wheel studs and nuts.
Includes:
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
NEED THIS PART FITTED?
THEN OUR STATE OF THE ART WORKSHOP IN BRISBANES BAYSIDE HAS YOU COVERED.
WE ARE AN AUTHORISED AL-KO IQ7 AND ESC SALES, SERVICE AND REPAIR CENTRE, DEXTER DSC SWAY CONTROL FITTED AND REPAIR CENTRE AS WELL AS A AUTHORISED AL-KO ENDURO TRAILING ARM SUSPENSION SALES AND FITTING CENTRE.
OUR LARGE LOCK UP WORKSHOP CAN HANDLE BOAT TRAILERS AND CARAVANS UP TO 40FT AND IS FULLY INSURED.
WE ARE QLD TRANSPORT ACCREDITED FOR SAFTY CERTIFICATES UP TO 3.5 TON, CERTIFICATE OF INSPECTIONS UP TO 10 TON, HVRAS PRE REGISTRATION INSPECTIONS ON ALL TRAILERS AND CARAVANS
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Bank Deposit
Account Name: R&M Marine
BSB: 633 000
Acc No. 1405 535 61
All direct deposits must have your Ebay name as a reference or they will not be applied against your purchase. This will hold up dispatch or your order so please ensure your name is referenced.
Credit Card
We accept credit card for instore pick ups
Dispatched goods are usually sent via Australia Post, TNT and Sendle.
If freighted goods are to be sent to a PO BOX please contact first as not all items can be sent to a PO BOX address.
While most deliveries take 1-6 days please allow up to 12 days for issues that are out of our hands.
No deliveries are available after hours and on weekends
If problems to arise please contact us and we will do our best to resolve them.
In store pick up is available for our Brisbane Showroom.
Please contact us first to discuss any issue you may have with your product for return.
All goods must be returned in their original packaging unopened/unused
Goods that have been opened can not be returned
Return postage is at the expense of the purchaser, we do not reimburse return postage costs.
Original postage fees are non refundable. If the item was purchased "Freight Free" then a 10% restocking fee will be applied to any itme being returned.
Purchaser has 30 days to notify us of intension to return item, after this time the item can not be returned.
All warranties listed are Manufacturers warranties and all goods must be returned to us for fault inspection prior ro repair/refund. Return postage is at the expensive of the purchaser for all warranty returns.
Unless other wise stated, all products have a warranty period of 12 months from date of pruchase. Warranty does not cover any related installation or re installation costs. The warranty will be null and void in the case of incorect usage or disregard of instructions.
ALKO 6 INCH GALVANISED HUB FORD STUD PATTERN HOLDEN LM BEARINGS
6" Gal Hub - Ford - Chinese LM Bearings - Marine Seal
Part Number: 441282G
6” Galvanised Hub Kit, Ford Stud Pattern (5x 4.5” (114.3mm) PCD)
Fitted with 1/2” UNF wheel studs and nuts.
Includes:
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
NEED THIS PART FITTED?
THEN OUR STATE OF THE ART WORKSHOP IN BRISBANES BAYSIDE HAS YOU COVERED.
WE ARE AN AUTHORISED AL-KO IQ7 AND ESC SALES, SERVICE AND REPAIR CENTRE, DEXTER DSC SWAY CONTROL FITTED AND REPAIR CENTRE AS WELL AS A AUTHORISED AL-KO ENDURO TRAILING ARM SUSPENSION SALES AND FITTING CENTRE.
OUR LARGE LOCK UP WORKSHOP CAN HANDLE BOAT TRAILERS AND CARAVANS UP TO 40FT AND IS FULLY INSURED.
WE ARE QLD TRANSPORT ACCREDITED FOR SAFTY CERTIFICATES UP TO 3.5 TON, CERTIFICATE OF INSPECTIONS UP TO 10 TON, HVRAS PRE REGISTRATION INSPECTIONS ON ALL TRAILERS AND CARAVANS
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Bank Deposit
Account Name: R&M Marine
BSB: 633 000
Acc No. 1405 535 61
All direct deposits must have your Ebay name as a reference or they will not be applied against your purchase. This will hold up dispatch or your order so please ensure your name is referenced.
Credit Card
We accept credit card for instore pick ups
Dispatched goods are usually sent via Australia Post, TNT and Sendle.
If freighted goods are to be sent to a PO BOX please contact first as not all items can be sent to a PO BOX address.
While most deliveries take 1-6 days please allow up to 12 days for issues that are out of our hands.
No deliveries are available after hours and on weekends
If problems to arise please contact us and we will do our best to resolve them.
In store pick up is available for our Brisbane Showroom.
Please contact us first to discuss any issue you may have with your product for return.
All goods must be returned in their original packaging unopened/unused
Goods that have been opened can not be returned
Return postage is at the expense of the purchaser, we do not reimburse return postage costs.
Original postage fees are non refundable. If the item was purchased "Freight Free" then a 10% restocking fee will be applied to any itme being returned.
Purchaser has 30 days to notify us of intension to return item, after this time the item can not be returned.
All warranties listed are Manufacturers warranties and all goods must be returned to us for fault inspection prior ro repair/refund. Return postage is at the expensive of the purchaser for all warranty returns.
Unless other wise stated, all products have a warranty period of 12 months from date of pruchase. Warranty does not cover any related installation or re installation costs. The warranty will be null and void in the case of incorect usage or disregard of instructions.