Oetiker Stainless Steel StepLess Ear Clamp Kit - OTK Clamp Kits - 100 piece and 150 piece

Genuine Oetiker Single Ear Stepless Clamp.

OTK 100 & 150 Piece Ear Clamp Kit

Kit Includes:

167-ECGK10 - 100 Pack OTK Stepless Clamp Kit / 167-ECGK15 - 150 Pack OTK Stepless Clamp Kit

16700004 - 7.8mm - 9.5mm x 10 / 20

16700007 - 9.6mm - 11.3mm x 10 / 20

16700011 - 11.3mm - 13.8mm x 10 / 20

16700016 - 13.2mm - 15.7mm x 10 / 20

16700020 - 15.3mm - 18.5mm x 10 / 20

16700024 - 17.8mm - 21.0mm x 10 / 10

16700029 - 20.9mm - 24.1mm x 10 / 10

16700033 - 23.9mm - 27.1mm x 10 / 10

16700040 - 28.4mm - 31.6mm x 10 / 10

16700042 - 29.9mm - 33.1mm x 10 / 10

14100338 - Side Closing Pincer x 1 / 1

Assembly Recommendations:

The OTK clamp "ear" is deformed with a constant tool jaw force - this practice is referred to as "force priority closure". This assembly method ensures that a uniform and repeatable stress is applied to the joint in addition to a consistent tensile force on the clamp interlock. Employing this methodology when closing a 167 series clamp will compensate for any component tolerance variations, and ensure that the clamp applies a constant radial force to the application. Fluctuations in component tolerances are absorbed by variations in the "ear: gap (s'). Clamp installations monitoring and process data collection are available by incorporating an "Electronically Controlled Pneumatic Power Tool" Oetiker ELK in the assembly process.

Important:

• The ear height is naturally given. Do not influence the ear height, either by changing the ear gap or with built-in hold-down devices in installation tools.
• Single tool stroke closure only, do not apply secondary crimping force.

Details:

• Stepless over 360°: Uniform compression resp. surface pressure.
• Closed Interlock: High radial loads, smooth outer contour.
• Teardrop Embossment: Higher radial loads with compressible materials.
• Clamp Ear: Compensates for component tolerances, adjustable surface pressure.
• Dimple: Increases clamping force, spring effect compensates for changes in diameter due to thermal expansion.
• Specially Formed Strip Edges: Reduced risk of damage to parts being clamped.