Fitment
1993-1998 For Toyota Supra Twin Turbo
2JZGTE w/ 94mm STROKER (3.4L) Only
Includes:
Manley Platinum Series Lightweight Extreme Duty Pistons #629000CE-6
Manley "H" Beam Steel Connecting Rods #14027-6
Cometic Head Gasket (Different thickness options are available, please contact us for details)
ACL STD Size Main & Rod Bearings & Thrust Washer
ARP Head & Main Stud Kit
Manley Platinum Series Lightweight Extreme Duty Pistons
Manley pistons are machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life. Offset wrist pin design is utilized for quiet start-ups. Perfect ring groove to skirt squareness is achieved through our unique "one fixturing" manufacturing method that assures maximum horsepower. All pistons come with moly coated skirts and will accommodate +1mm valve sizes. Round wire locks, premium chrome moly wrist pins, and premium steel top ring sets from Total Seal are included with every kit at no additional charge.
ITEM SPECIFICS | |||
Condition: | New | Brand: | Manley Performance |
Bore Size | 86.0 | Manufacturer Part Number | 629000CE-6 |
Stroke(mm) | 94 | Engine | For Toyota 2JZGTE |
Dome Volume (cc) | -8 | Vehicle Make: | For Acura |
Comp Ratio | 10.0 | Piston Type | Dish |
Rod Length | 5.590" | Piston Wt / Gms | 315 |
Cylinder Head (cc) | 45 | ||
Manley "H" Beam Steel Connecting Rods
Manley "H" Beam connecting rods are manufactured from 4340 forgings to the same exacting standards developed and approved by our original equipment customers. There is a vast difference in quality between a Manley "H" Beam and the "other" inexpensive H-Beams on the market. Weight matched to +/- 1.5 grams. Perfectly round big and small ends. Bend and twist is tightly controlled. 3/8" ARP 2000 Cap fasteners.
Part # | Center-to-Center | Big End Bore | Big End Width | Pin Diameter | Pin Bore | Gram Weight |
14027-6 | 5.590" | 2.167" | 1.015" | .866" ( 22 mm ) | .8671" | 552 |
Cometic Head Gasket
Bore: 87mm
Thickness: .070"
(Different thickness options are available, please contact us for details)
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
ACL STD Size Main & Rod Bearings & Thrust Washer
ENGINE BEARINGS | ||||
CON ROD BEARING SET |
MAIN BEARING SET | |||
Part# | Part# | |||
6B8100H | 7M8103H | |||
Sizes | STD | STD | ||
Oil Clearance | Standard | Standard | ||
Half Type | Identical halves | Upper & Lower | ||
Material |
Tri-metal Hardened steel backs | Tri-Metal | ||
Min Std Shaft Size |
2.0465in / 51.981mm |
2.4403in / 61.984mm | ||
Max Std Shaft Size |
2.0472in / 52mm |
2.441in / 62.001mm | ||
Min Std Tunnel Size |
2.1663in / 55.024mm |
2.5992in / 66.02mm | ||
Max Std Tunnel Size |
2.167in / 55.042mm |
2.5998in / 66.035mm | ||
Max Wall at Crown |
0.0593in / 1.506mm |
|
0.0789in / 2.004mm | |
Max Overall Length |
0.7598in / 19.3mm |
0.7874in / 20mm (8103H/HX) |
THRUSTWASHER SET | ||||
Part# | 2T8103 | Material | Alutin | |
Sizes | STD | Notes | Upper & Lower |
ARP Main Stud Kit
Specifications | |
---|---|
Socket Size(s) | 12mm 12pt, 4mm Allen |
Specifications | |
---|---|
Socket Size(s) | 1/2 12pt, 3/16 Allen |
Ask us about saving money with our PACKAGE DEALS | |
CP Cometic ACL Ferrea and ARP Kits | Custom Made Package Deals |
AEM Package Deals | Package Deals |
Ask us about combining purchases for package deal auctions
|
If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.