Motorised Projector Screen Blind Curtain Wireless RF Remote Control UP DOWN Switch
No Cables or plug supplied - Please make sure you are comfortable with the wiring
PRODUCT DESCRIPTION:
This RF Remote Controller features forward-reverse-stop capability. You can rotate the motor in up or down direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for motorised projection screens, electric curtains, electric pylonss, garage doors, retractable doors, etc
Features:
Wireless control, easy to install
AC220V voltage input, according to the needs of your choice
High confidentiality, large storage capacity, stable performance and low power consumption
Each receiving controller can store multiple remote controller
Remote control and manual control is fully compatible with
The wireless signal can pass through walls, floors and doors.
You can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within 100 meters
Mainly used to control: projector screen, electric curtains, electric pylon, garage doors, extendable doors, pumps, etc.
Product Specifications:
Operating Temperature: -25°C ~ + 75°C
Operating Voltage: AC 220V
Transmission Distance: 100m (in the open air)
Operating frequency: 315MHz
The load power: ≤500W
Receiver Size: 94 x 55 x 30mm
Receiver Weight: 91g
Transmitter Size: 121 x 45 x 15mm
Transmitter Weight: 42g
You need to connect the wires accordingly. No cables or plug supplied.
If you are planning to replace your existing remote control unit please identify the four wires (you might need to open up the control unit) cut the existing wire and join this control unit.
The unit itself doesnt need ground (earth - usually yellow-green) you may directly join this cable from wall socket to the motor.
The wire for control unit to screen ( 4 core wire) can be found in most electrical shops and for the wall socket to control unit get a 3 core wire.
To program the remote after full wiring press the learn key on the control unit for 5 second and you will see the led flashing, release the key and press any key on the remote.
PACKAGE CONTENTS:
1 x Control Unit
1 x RF Remote Control Unit
1 x 23 A Battery for RF Remote