Directions:
Please apply only to a
clean, dry, surface.
Below are some instructions on how to apply these stickers:
Step 1: Rub the sticker to be sure the transfer tape is properly adhered
to the sticker.
Step 2: Clean and dry the desired area. Stickers will stick best to clean
smooth surfaces.
Step 3: Remove the paper backing slowly making sure the sticker stays
adhered to the transfer tape
Step 4: Carefully position the sticker to the desired area. Once the sticker
sticks it will be nearly impossible to re-position without destroying the
sticker. Rub the sticker from one side to the other, eliminating any air
bubbles.
Step 5: Use a hard-edged object like a credit card to make sure the entire
sticker is fully adhered to the surface.
Step 6: Slowly remove the transfer tape. Making sure no part of the
sticker remains on the transfer tape.
Step 7 Check for air bubbles. In most cases air bubbles, can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible, once the bubble is gone