StoneFil™ è un filamento a base PLA additivato con il 50% di polvere di pietra, capace di conferire all'oggetto stampato la texture opaca e una finitura simile alla pietra. Questo "riempimento in pietra" conferisce al filamento l'eccezionale effetto ottico. Il materiale pesa circa il 37% in più rispetto al normale PLA. Gli oggetti stampati hanno un'effetto estremamente opaco. Ogni oggetto stampato con StoneFil ™ ha una sfumatura unica. StoneFil™ è abrasivo a causa della polvere di pietra contenuta, portando ad una maggiore usura dell'hot end.
General printing guidelines *
Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.15mm | Flow rate: ± 110% |
Print temp: ± 215 - 240° C | Print speed: High / Medium | Retraction: Yes ± 5mm |
Heat bed: ± 0 - 60° C | Fan speed: 50-100% | Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.