Long Range Wireless (800 metre) Disabled Toilet Alarm, comprising of a Wireless Pull Switch & Wireless Latching Siren & Flashing Strobe LED Assembly from the Protect 800 family.
How it Works:
If the Pull Switch is activated, a long range Wireless Signal will be transmitted to the Siren Assembly, this will activate the built in Siren & Flashing LED, which will remain Latched ON until the reset button is pressed (which is located on the bottom of the box).
You can add up to 15 additional Wireless Pull Switches (or other transmitters) to this system together with unlimited Siren assemblies.
This is ideal for when the traditional shorter range kits do not have the Wireless range to be able to fit the Siren into the desired locations.
Wireless Range:
The Wireless operating range between the Pull Switch & Siren Assembly is an impressive 800 metres (line of sight) which equates to around 400 - 500 metres in most applications.
Siren Assembly:
The Wireless Siren assembly is powered by a 3 or 2-pin plug in transformer and has:
The assembly is fully weatherproof should you wish to install it outside.
Pull Switch Assembly:
The Wireless Pull Switch is powered by a built in CR123A Battery (making it very easy to locate) which will operate for between 12 - 18 months in most applications.
It is supplied to be ceiling mounted and comes with 2 metres of cord which can easily be shortened to suit the application.
The maximum number of Pull Cords or other Protect 800 Transmitters that can be used is 16.
Installation:
The Siren assembly is simply fitted to the wall using 4 x screws through the side mounted lugs and is then connected to the power supply using the transformer supplied into a suitable socket.
The Pull Switch is fitted Firmly onto the Ceiling using suitable fixings (not supplied as surfaces will vary).
A Disabled Toilet Alarm with Long Range Wireless Operation for specific applications.
If you need further advice, please Ask !!
Siren Assembly:
Mounting Box:
Pull Switch Assembly:
Transmitter:
Pull Switch: