The Datapath Fx4-HDR builds on the success of its award winning Fx4 and x4 predecessors and brings the superb HDR 10-bit colour clarity, 4K60 resolution as well as audio support into the mix. HDMI 2.0 input Fully HDCP2.2 capable Audio support Rotates, crops and scales | |
Operating Temperature |
0 - 35°C/ 32 - 96°F |
Power Requirements |
IEC switched and fused mains connectors 100-240V, 50/ 60Hz/ 35W |
Video Input Connections |
HDMI 2.0 (2160p/ 60 or equivalent up to 616 MP/s) 2x HDMI1.4 (2160p/ 30 or equivalent up to 297 MP/s |
Video Output Connections |
HDMI version: 4 x HDMI 1.3 (1080p/ 60 or equivalent up to 165 MP/s) Loop-through HDMI 2.0(locked to selected video input resolution) |
Input Surface |
8k x 8k maximum |
Genlock Input |
Analogue black-burst on dedicated BNC connector. Any video input (HDMI1, HDMI2, HDMI3) |
Control Interfaces |
Dual 100BaseT Ethernet ports with inbuilt managed switch. USB2.0 Type B connector (full speed operation) |
Firmware Support |
Updates supported via USB and Ethernet connection |
Storage | -20 to 70°C |
Relative Humidity |
5% - 90% non-condensing |
Warranty 3 years Next generation display wall controller - One box. Four outputs. Millions of possibilities. Advancements in digital signage requirements mean that customers
demand greater freedom in creating and deploying small, medium and large
scale signage projects. The Datapath Fx4 is a multi-faceted stand
alone display controller that supports a choice of inputs, high
bandwidth loop-through as well as 4 genlocked HDMI outputs. Each output monitor can take its input from any region of the input
image as all of the required cropping, scaling, rotation and frame-rate
conversion is handled by the Datapath Fx4 hardware. These regions can
overlap to allow any output to replicate another or can be configured to
support any creative splice of the source material. This allows the
support of many non-rectangular screen arrangements with uneven gaps, as
well as any mix of monitor orientations. Network Connectivity The Datapath Fx4 has dual ethernet ports to allow users to add the device to their networks. Only one Datapath Fx4 in the chain requires connection to the physical LAN as ethernet loop through is supported on the second port, meaning multiple devices can be connected. Wall Designer Datapath’s hugely popular multiscreen design tool, Wall Designer has also been updated to incorporate Fx4. Wall Designer allows users to add displays from the ever expanding database of monitors, visualise their content by adding inputs and adjusting display regions and finally instantly program all Datapath Fx4s either via USB or the network ports. |