4 Stück Nema34 34HS5460 Schrittmotor
4 Stück Schrittmotortreiber DM860H Blau (AC&DC Eingangsspannung)
4 Stück Schaltnetzteil S-350-60 (350W 60V) Netzteil
1 Stück Schaltnetzteil S-50-5 (50W 5V) Netzteil
1 Stück Breakout Board & Kable DB25
4 PCS Nema34 34HS5460 Stepper Motor
4 PCS Stepper Motor Driver DM860H Blue (AC&DC Input Voltage)
4 PCS Power Supply 350W 60V
1 PC Power Supply 50W 5V
1 PC Breakout Board&Cable DB25
Schrittwinkel | Step Angle | 1,8 ± 5% °/ Step |
Spannung | Rated Voltage | 3,60 V |
Nennstrom | Rated Current | 6,00 A /Phase |
Widerstand pro Phase | Phase Resistance | 0,60 ± 10% ohm/Phase |
Induktanz pro Phase | Phase inductance | 8 ± 20% mH/Phase |
Drehmoment | Holding Torque | 12 Nm Min ≈ 1700 oz-in |
Rastmoment | Detent Torque | 24,50 N.cm Max |
Drehmoment | Rotor Torque | 4000 g- cm² |
Anzahl der Drahtleitungen | Number of Wires | 4 |
Wellendurchmesser | Shaft Diameter | Dual Flat Shaft=Φ14 ± 0,012 mm |
Motorlänge | Motor Length | 151 mm |
Gewicht | Motor Weight | 5,38 kg |
Leitungsverbindung | Wires Connection | EN: Red A+ , Green A- , Yellow B+ , Blue B- DE: Rot A +, Grün A- , Gelb B + , Blau B- |
Specification/ Spezifikation:
Input Voltage/ Eingangsspannung | AC:24-80VAC DC:24-110VDC |
Microstep Setting/ Unterteilungsbereich | 400-51200ppr (16 Microsteps) |
Output Current/ Ausgangsstrom | 2.1-7.2A (Peak) |
Input Pulse Frequency/ Impulsantwort Frequenz | 0 - 100 kHz (.) |
Storage Environment | -20 ℃ - +80 ℃ |
Humidity | Not condensation, no water droplets |
Using Environment | -5 ℃ – 50 ℃, avoid dust and corrosive gas |
Characters/ Eigenschaften:
· The latest 32-bit digital processing technology
· Advanced control algorithm for variable current and variable frequency conversion
· Low heat generation, low motor vibration and stable operation
· Built-in micro-segmentation
· Smooth operation and low noise
· Integrated parameter power-on auto-tuning function
· Subdivision setting(within 400-51200)
· With over-current, over-stage, undervoltage protection
Detailed information
Spannung | DC Voltage | 60V |
Spannungstoleranz | Voltage Tolerance | +/-1% |
Nennstrom | Rated Current | 5,85 A |
Strombereich | Current Range | 0-5,85A |
Spannungsspannung | Ripple &Noise | (Max): 240mVp-p |
Line Regulation | Line Regulation | +/- 0,5% |
Load Regulation | Load Regulation | +/- 0,5% |
Nennleistung | Rated Power | 350 W |
Nennleistung | Rated Power | 86% |
Wechselstrom | AC Current | 6,5A/115V 4,0A/230V |
Anlaufzeit | Setup Rise, Hold Time | 200ms, 100ms, 20ms |
Vibration | Vibration | 10-500Hz, 2G 10min/11 Zyklus, 60min, je Achse |
Stehspannung I/P-O/P | Withstand Voltage I/P-O/P | 3KVACI/P-FG: 1.5KVACI/P-FG:0.5KVAC |
Isolationswiderstand | Isolated Resitor | I/P-O/P, I/P-FG:500VDC/100M W |
Arbeitstemperatur / Feuchtigkeit | Working Temp. Humidity | -20°C - +85°C, 10%-95%RH |
Abmessung | Dimension | 215mmx115mmx50mm |
Gewicht | Weight | 0,9kg |
Sicherheitsstandart | Saftey Standart | UL1950 |
EMC | EMC | FCCpart1.5J class A |
Spannung | DC Voltage | 5V |
Spannungstoleranz | Voltage Tolerance | +/-1% |
Nennstrom | Rated Current | 10 A |
Strombereich | Current Range | 0-10A |
Spannungsspannung | Ripple &Noise | (Max): 75mVp-p |
Line Regulation | Line Regulation | +/- 0,5% |
Load Regulation | Load Regulation | +/- 0,5% |
Nennleistung | Rated Power | 50 W |
Nennleistung | Rated Power | 71% |
Wechselstrom | AC Current | 1.3A/115V,0.65A/230V |
Anlaufzeit | Setup Rise, Hold Time | 200ms, 100ms, 20ms |
Arbeitstemperatur / Feuchtigkeit | Working Temp. Humidity | -10℃~+60℃;20%~90 %RH |
Abmessung | Dimension | 215mmx115mmx50mm |
Gewicht | Weight | 0,9kg |
Connection | Connect 6 Drivers, control 6 Motors at the same time |
DB25 Output Pin | P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17 |
DB25 Input Pin | P10,P11,P12,P13,P15 |
DB25 GND Pin | P18 - P25 |
P2 = | X axis Pulse |
P3 = | X axis Direction |
P4 = | Y axis Pulse |
P5 = | Y axis Direction |
P6 = | Z axis Pulse |
P7 = | Z axis Direction |
P8 = | A axis Pulse |
P9 = | A axis Direction |
P14 = | B axis Pulse |
P1 = | B axis Direction |
P16 = | C axis Pulse |
P17= | C axis Direction |
Input pin: P10 ,P11, P12, P13, P15 | Set them for Emergency Stop and X Y Z Limit switch |
e***s (9845)
b***t (6)
d***a (93)
ACT MOTOR GmbH
www.act-motor.com
Rosenheimer Strasse 10
28219 Bremen
Handelsregister Nr.: HRB30138HB Amtsgericht Bremen
Ust-IdNr: DE299 744 704
Steuernummer: 60 104 16815
WEEE-Reg.-Nr.: DE 94462591