RCA to Male XLR Cable Gold Phono Lead Van Damme Subwoofer Neutrik Rean (Option See Below)
Great sound quality, robustness, this is what you will get from this lead.
Designed to go from an RCA Phono output to an XLR input. The audio source could be any line level audio equipment, examples CD player, Tape Deck, Media player etc. The XLR would go into an audio input, this could be a mixing desk, active speaker, active subwoofer etc. The cable is dual screened to help with noise reduction.
This lead is made by us. We have been in the industry for over 30 years and have vast experience in soldering. We use advanced soldering equipment as well as 4 percent silver solder in its construction. Our experience in the industry is exceptional, we have consistently given our customers the best service and products we can.
This is for one lead, sold as a single lead.
Option
We also sell this cable with red/white ID colour rings/boot, for left and right audio. These leads are sold as single leads which means you can get the exact colour cable and choose between Black, White and Red colour ID's on the connectors. So please take a look at our other listings on the link below. You will normally get a discount when ordering 2 of more leads.
Cable Length - Important
PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS
Leads 1m or less (patch leads) will be measured visible cable from the rear boot of the connector. We add 90mm of cable FREE to compensate for the connectors.
Leads over 1m will be measured cut length of cable. The connectors use up 90mm of cable.
If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through eBay messages.
We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through ebay.
Neutrik Rean Connectors
We only use genuine connectors. We use NC3MXX-B Male Gold XLR and NYS373-0 Male Gold RCA. Both connectors have gold contacts, black outer shell and cord grips built inside them to ensure cable stays firmly inside the connectors.
Van Damme Cable Specifications
Van Damme Pro Grade Classic XKE Instrument Cable:
Now with Van Damme new logo on the cable. Low capacitance, Oxygen Free silver plated Copper for better sound reproduction over just copper cable, low capacitance. Commonly used for unbalanced input and output audio devices. The cable has excellent noise rejection due to its tight construction dual screens of conductive thermoplastic and close-lapped copper screen.
Mechanical Specification
Conductors 3 x 0.20 mm silver plated ultra-pure oxygen-free copper
4 x 0.20 mm bare ultra-pure oxygen-free copper
Conductor size 7 x 0.20 mm, 0.22 mm2, AWG 24/7
Insulation Foamed polyethylene
Screen 1 0.40 mm conductive thermoplastic
Screen 2 80 x 0.10 mm close lap spiral bare oxygen-free copper
Jacket material Flexible PVC/Neoprene composite
Overall diameter 6.00 ± 0.15 mm
Bend radius 10 x overall diameter
Operating temperature -20 to +70 ⁰C
Electrical Specification
Resistance Conductor < 90 Ohm/km
Insulation > 5000 MOhm/km
Capacitance Core to screen 90 pF/m