Schrittwinkel | Step Angle | 1,8 ± 5% °/ Step |
Spannung | Rated Voltage | 4,80 V |
Nennstrom | Rated Current | 3,0 A /Phase |
Widerstand pro Phase | Phase Resistance | 1,60 ± 10% ohm/Phase |
Induktanz pro Phase | Phase inductance | 6,80 ± 20% mH/Phase |
Drehmoment | Holding Torque | 3Nm ≈ 425 oz-in |
Rastmoment | Detent Torque | 12 N,cm Max |
Drehmoment | Rotor Torque | 800 g- cm² |
Anzahl der Drahtleitungen | Number of Wires | 4 |
Wellendurchmesser | Shaft Diameter | Φ8,0 ± 0,012 mm |
Motorlänge | Motor Length | 112 mm |
Gewicht | Motor Weight | 1,70 kg |
Leitungsverbindung | Wires Connection | EN: Black A+ , Green A- , Red B+ , Blue B- DE: Schwarz A +, Grün A- , Rot B +, Blau B- |
Specification/ Spezifikation:
Input Voltage/ Eingangsspannung | 18-50V DC, 36 V (typisch) |
Microstep Setting/ Unterteilungsbereich | 400-25600ppr |
Output Current/ Ausgangsstrom | 1.0A-4.2A |
Input Pulse Frequency/ Impulsantwort Frequenz | 200 kHz (.) |
Insulation Resistance / Isolationswiderstand | ≥500MΩ |
Storage Environment | -40 ℃ - +70 ℃ |
Humidity | Not condensation, no water droplets |
Weight | 200g |
Using Environment | -10 ℃– 45 ℃, avoid dust and corrosive gas |
Characters/ Eigenschaften:
· Average current control, 2-phase sinusoidal output current drive
· 8 channels output phase current setting
· Offline command input terminal
· High start speed
· High holding torque under high speed
· High performance, low price
· Opto-isolated signal I/O
· Overvoltage, under voltage, overcorrect, phase short circuit protection
· 15 channels subdivision and automatic idle-current reduction
· Motor torque is related with speed, but not related with step/revolution
e***s (9845)
b***t (6)
d***a (93)
ACT MOTOR GmbH
www.act-motor.com
Rosenheimer Strasse 10
28219 Bremen
Handelsregister Nr.: HRB30138HB Amtsgericht Bremen
Ust-IdNr: DE299 744 704
Steuernummer: 60 104 16815
WEEE-Reg.-Nr.: DE 94462591