DescriptionWelcome to our store: Tips: If you need Large quantity, please contact us, we can wholesales. Notes: there are 3 type charger module, select and buy you need. W332 version: Support charging and discharging at the same time. Main control: W332, now the mainstream fast charging chargers all use W332, bidirectional PD, QC3.0 fast charging, support and compatible with more fast charging protocols. Used to DIY or upgrade the power bank! Input: MICRO 5V 2A 9V 2A TYPE C: 5V 2A 9V 2A supports TYPE C protocol Output: PD fast output + QC3.0. (Single USB + TYPE C) Output: 5V 3.1A 9V 2A 12V 1.5A Power indicator: 4 lights + fast charge indicator Onboard efficiency: 92% Power consumption: <100 Ua Charge while discharge: Yes SW6106 version PD protocol of QC3.0 fast charging motherboard Android / type-C input: 5V-3A 9V-2A 12V-1.5A Type-C output: 5V-3A 9V-2A 12V-1.5A (compatible with PD fast charge) Output 1: 5V-3A Output 2 (Blue USB): 5V-3A 9V-2A 12V-1.5A Efficiency: Discharge 88% above 2A 1% 95% discharge Circuit board: software board, multiple protection for overshoot, over discharge, short circuit and overload Circuit board size: 70 * 23mm IP5328 version parameter: 1. Input model; Type C (support protocol fast charge input), Apple Lightning Type-C (does not support protocol fast charge input) 2, input voltage; 5-12V (fast charge protocol automatically adjusts the voltage) 3, charging current; 3100mah (fast charge protocol automatically adjusts the current) 4, charging method; automatic adaptation 5, output 1 USB fast charge mother, 2 USB normal 5V output. 6, the output voltage is; 5V-12V ± 0.3V (fast charge protocol automatically adjusts the voltage) 7, the output USB rated current is; 3.1A (fast charge protocol automatically adjusts the current) 5V3.1A/9V2.0A/12V1.5A 8, discharge efficiency: >85% It is suitable for polymer rechargeable lithium Li-ion battery. Access battery requirements: 3.3-4.2V polymer Li-ion battery: Do not connect other batteries, such as 1.2V nickel-metal hydride batteries, 3.2V iron-lithium batteries, all dry batteries, 12V lead-acid batteries. The battery current requires more than 3A to discharge and charge. Please do not use a battery with high internal resistance. When you combine several battery in parallel, the battey should be in same voltage and resistance. Immediately after the battery is connected, the board is usually activated to have an output. B+ is the positive batter, B- is the negative battery negative Notes: polarity should be connect correctly, or ban the chip. IP5328 features: 1. Support multiple USB at the same time: 2 USB A port output, 1 USB B port input, 1 USB C port input / output. 2. Quick charge specifications: Any port supports fast charge, integrated QC2.0 / QC3.0 output fast charge protocol, integrated FCP input / output fast charge protocol, integrated AFC input / output fast charge protocol, integrated SFCP input / output Fast charge protocol, integrated MTK PE + 1.1 & 2.0 output fast charge protocol, integrated USB C DRP protocol, support input and output fast charge, compatible with BC1.2, Apple, Samsung mobile phone fast charge. Can not sure all phone quick charging, it not support, it output 5V normal charging. 3. Charging specifications: The battery terminal charging current can be up to 5.0A, adaptive charging current adjustment, and supports 4.20V, 4.35V, 4.40V, 4.50V batteries. 4. Discharge specifications: Output current capability: 5V: 3.1A 9V: 2.0A 12V: 1.5A, synchronous switch discharge 5V 2A efficiency is more than 95%, support line compensation. 5. Power display: Built-in 14bit ADC and fuel gauge, support 1/2/3/4 LED power display, intelligent identification LED power display lamp number, adjustable battery power curve, the display light is more uniform. 6. Other functions: built-in lighting driver, automatic detection of mobile phone insertion and removal, fast charge status indication, support for buttons, intelligent identification of load, light load automatically enters standby. 7. Multiple protection and high reliability: input overvoltage, undervoltage protection, output overcurrent, overvoltage, short circuit protection, battery overcharge, overdischarge, overcurrent protection, IC overtemperature protection, Package Included: 1pcs x Charger Module board (battery and cover not included) Payment
Delivery details
Terms of sales
Return
Contact us
|