Color: As picture shwon
Power: 100W
Voltage: 3-20V
Current: 0-5A
ZY12PDN:
2.Provide Z cheap, cost-effective Z high PD spoof power detection program, Z violates the advertising method of their own brain.
3.Breaking the strange circle of the previous PD detector price, do your part for PD popularization!
4.The PD trigger uses the hardware protocol IC, and the compatibility is not comparable to the soft solution.
5.The version with USB adopts ARINTECH pure copper female seat imported from South Korea. The non-domestic iron shell can be compared and the internal resistance is small.
6.Large-volume three-terminal regulator, large-capacity ceramic capacitor filter, Japan ALPS tact switch, focusing on stability.
7.With USB soldering position and 5.08 screw terminal soldering position, it is convenient to make Type-C to DC adapter cable.
8.Small size 15mm wide * 30mm long, soldered DC line heat shrinkable tube can be used to charge your notebook with PD mobile power.
2.Effectively prevent problems such as VBUS short circuit to CC burning during the test.
3.It is very suitable for testing fixtures to directly measure the bare power module. It does not need to be assembled to measure.
Or DIY fast charging lure with plug. No hardware switch is not easy to accidentally touch the voltage.
4.When using the 5A-EMARK line DIY, the maximum power is supported to 100W. The compatibility is excellent.
5.The hole pitch is 2.54mm. It is convenient to insert the soldering pin into other motherboards.
6.Turning the TRIG foot to ground is equivalent to pressing the button. It can be triggered by optocoupler or relay isolation.
7.If CC1 or CC2 is connected to the male, you only need to pick one of them.
ZYPDS ultra-mini single function：
1.ONOY CAN Trigger 15 and 20v
4.TC maternal life seconds a few streets, TC shrapnel in the male, loose loose contact is a male pot.
5.Original IP magic version of the pure hardware trigger PD, stable and reliable program-free, very small size.
6.The maximum power is supported to 100W, the compatibility is good, the self-consumption is small, and the deception speed is fast.
7.Very suitable for PD to DC line output charging notebooks and other things. After the output line is welded, the heat shrinkable tube can be retracted.
8.You can set the maximum trigger 15V or 20V logic, use a drop of solder to connect the yellow circle and the halves of the pad to set 20V, not 15V.
9.Trigger Logic: Trigger the voltage supported by the PD Adapter that is less than or equal to the set value.
For example, if 15v is set and the adapter supports 5 9 20V, it will trigger 9V.
A 7mm heat-shrinkable tube with glue is given. After welding the wire sleeve, it is heated by a wind gun or the like to prevent moisture and short-circuit and breakage.
10.Support millet 65W and other cost-effective high-line PD power supply!
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction. Then we will improve our service immediately.
It is impossible to address issues if we do not know about them.
1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.
- We only accept payment through Paypal.
- Items will go to post within 1-2 business days after payment confirmed.
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
On 21-Jun-20 at 06:07:18 BST, seller added the following information: