151 Nonslip Black Matt Paint Interior Exterior Coatings Paint Gloss Wooden 180ml

Nonslip Black Matt Paint Interior Exterior Coatings Paint Gloss Wooden 180ml

Hard Drying, High build, High-Performance Tough, Durable and non Yellowing

Non-Slip Black Paint 180ml 151 Non-slip black paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood, metal and concrete.

The textured finish will help prevent slipping when wet.

This floor non-slip paint is made with safety in mind. The special formula combined gives it outstanding grip even in wet conditions.

It can be used on steps and slopes that often get wet to avoid slips and falls.

This paint is extremely durable and flexible when dry. It will not chip or flake like some other paints. It can be used in the toughest of environments.

The paint is very opaque and has great adhesion to wood, metal, stone, concrete and asphalt. 1 coat should be enough for most situations.

This paint is suitable for both external and internal use.

Applications include: steps, paths and decking; driveways and garages; kitchen and bathroom floors. This paint is also ideal for work setting such as warehouses and factories.

• Top Coat Paint
• Tough And Durable
• Hard drying, high build, high performance.
• Use for inside and outside Surfaces Such as wood, metal and concrete
• For Interior And Exterior Use
• High Build
• Hard Drying
• High Performance

Directions: All surfaces should be clean and dry and free of dust, rust, oil, and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for the paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all-purpose Brush Cleaner.

Size: 180ml

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.