Vantec ICEBERQ M.2 NVMe/SSD Heat Sink With Thermal Pad


The Vantec ICEBERQ M.2 NVMe/SSD Heat Sink with Thermal Pad keeps your M.2 NVME/SSD cool near ambient temperatures by dissipating and protecting your M.2 module from heat. This High Vented Fins Heat Sink is easy to install on any standard M.2 2280 size module. It will help to extend your M.2 lifespan with a less likely chance of suffering from overheating failure. It keeps your M.2 Module within normal operating temperature to ensure it performs at peak performance during intense data usage. This Heat Sink is designed for Single or Double Sided M.2 NVMe/SSD and uses Dual Thermal Pads with rubber spacer to Dampen Vibration and provides full contact on both sides. The Thumb Screw Mount is easy to secure, heat dissipating, and sturdy. The Flat Base Heat Sink makes full contact with your M.2 Module for maximum heat dissipation for your whole module and it is available in Black, Red, and Blue Color Heat Sink.  



  • Maximum Heat Dissipation using High Vented Fins Heat Sink
  • Fit Standard Single or Double Sided Size M.2 2280 NVMe/SSD 
  • Uses Aluminum Alloy with Dual Thermal pad with Heat Dissipating Properties 
  • Maximum Cooling for NVMe/SSD Module on Both Sides
  • Dual Function Thermal Pads to Dampen Vibration and Contact on both sides
  • Thumb Screws for easy & secure mounting to last and will not break down.
  • Flat Based Contact for Maximum Heat Dissipation on whole module 
  • Available in Black, Red or Blue Color Heat Sink


  • Model: HS-NVME150-BK (Black), -RD (Red), -BL (Blue)
     
    Heat Sink Usage: M.2 NVMe or M.2 SSD
    Heat Sink Fit: M.2 2280, Single or Double Sided Module
    Mounting: Full length contact with Thumb Screws
    Mount Location: Motherboard M.2 slot or Add-on Card M.2 slot
    Thermal Protection: M.2 both sides
    Main Material: Aluminum Alloy
    Heat Sink Only Dimensions: 2.24 x 0.86 x 0.59 inches / 57 x 22 x 15 mm (L x W x H)
    Mounted Dimensions: 2.76 x 0.94 x 0.98 inches / 70 x 24 x 22 mm (L x W x H)
    Item Weight: 1.97 oz. / 56g
    Mounted Height: 22 mm (from base)
     
    System Requirements:
    • Requires 25mm Minimum Height clearance when mounted with M.2 Module on motherboard or Addon card
    • Standard M.2 NVMe/SSD Module PCB Size (2280 only), other size will not fit 
     
    What's Included:   High Fins Heat Sink (top), Heat Sink Sleeve (bottom), Thermal Pads, Rubber spacers, Thumb Screws, Quick installation Guide