Iron Planet Hobbies

TCS KAM4P-SH ~ DCC Decoder ~ Keep Alive ~ 8 Pin Plug ~ 1″ Harness ~ 1486

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but features the same operational characteristics. The KAM4P-LH includes a long-length (1 inch) harness with 8-pin NMRA plug at the end.

Keep-Alive®:

Included on-board for smooth, stutter-free operation.

Back EMF Load Compensation:

Provides superior slow speed control and high performance under load.

Quiet Drive:

Super-quiet motor control for "buzz" free motor performance.

DC Mode:

Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

Incandescent Bulb Support:

This decoder can be used with 12 Volt bulbs.

Function Remapping:

Buttons 0 through 12 may be used to control the lighting functions of this decoder.

Programmable Lighting Effects:

Choose from 20 separate user-programmable lighting effects!

Dimmable Brightness:

Configure multiple different brightness levels for your LED's or incandescent bulbs.

Decoder Lock:

Feature which prevents accidental/unwanted programming while activated.

Airwire™ Compatible:

Fully compatible with Airwire™ operation.

User-Loadable Speed Tables:

Configure custom speed curves and set speed limits.

Specs:

Interface Type: Direct-Plug (8-Pin NMRA)

Dimensions (L x W x H): 0.945” x 0.66” x 0.33” or 24 mm x 16.7 mm x 8.38 mm

Scale: HO Scale

Continuous/Peak: 1.0/2.0 Amp

Total Functions: 4

Function Rating: 200 mA

12V Outputs: 4

We are an authorized TCS dealer.

Thanks For Looking!