Original black Bitex RAR9 RAF10 hubs without logo for J bend spokes.
RAF10 front hub. OLD 100mm, hole for 5mm skewer. 66 grams. 4x688 steel bearings
Available with you choice of:
16 Holes
18Holes
20 holes
RAR9: OLD 130mm (option for 135mm, please request). 10mm axle, hole for 5mm skewer. 4x6802 steel bearings
Available with you choice of:
24 Holes in 1:1 pattern (10 holes on drive side, 10 holes on non-drive side)
21 Holes in 2:1 pattern (14 spokes on drive side, 7 spokes on non-drive side)
24 Holes in 1:1 pattern (12 holes on drive side, 12 holes on non-drive side)
24 Holes in 2:1 pattern (16 spokes on drive side, 8 spokes on non-drive side).
Please precise the number of Holes you want for each hub.
Your choice of Freehub:
1) Shimano compatible for 11 speed, (please request if you need a spacer for use with 10 speed cassettes). For the Shimano compatible free-hub, the light aluminium freehub is protected by a patented thin anti-bite stainless steel strip so that your cassette cogs will not dig into the alloy, become hard to disassemble and leave ugly marks into the freehub.
2) Campagnolo 9, 10, 11 and 12 speed compatible
3) SRAM XD 11 speed compatible for 11 speed
4) SRAM XDR 12 speed for SRAM AXS road
5) Shimano Microspline 12 speed
This is the ultralight road offering from Bitex machined out of the superior Aluminum 7075 alloy.
This rear hub is a concentrate of technology.
1. It uses a simple easy to service design, built on a light and sturdy 15mm alloy axle
2. It uses a light-weight Al 7075 Freehub which uses the Bitex patented 6 pawls technology working in 2 sets of 3 with an angle offset between the two sets to deliver 48 engagement points per rotation for rapid re-engagement from freewheeling.
3. With the 2:1 technology using 16 holes on the drive side (recommended at 2x crossing) and 8 holes on the non-drive side (recommended radial), a wheel with almost even tension on both sides can be built instead of the very uneven tension generated by the wheel dish on standard wheels with the same number of spokes on both sides. You get the weight and aerodynamics benefits of a low spoke count wheel, with the strength and stiffness of a higher spoke count wheel.
4. Uses high-quality steel TPI bearings (also used by DT Swiss)
For detailed dimensions see drawing.
Established almost 100 years ago (1923) Bitex is a reputable manufacturer based in Taiwan who has been in business 10 years longer than Campagnolo (1933) and almost as long as Shimano (1921).
Bitex offers a broad range of well designed high-quality hubs for almost every biking discipline. Over the last decades, like other quality Taiwanese brands and OEM manufacturers (like Giant, Merida and many others), as the low-end mass bicycle parts business was moving to mainland China, Bitex moved upscale both in its own products and in the products it manufactures on an OEM basis for many well-known brand names in the bicycle industry. We are an official Bitex reseller in our region.
ROI Cycles is relatively new to Ebay because I decided to start doing professionally what I have been doing as a hobby on Ebay since 2011 which is to sell a mix of interesting new, used and vintage classic bike parts, you can check my personal EBay account jumeiss with almost 1000 transactions and 100% positive feedback.
International shipping via registered mail included in the price. It should take 7 to 20 days to most locations.
We are an environmentally conscious business and use almost exclusively recycled shipping materials even for new products.
Will ship within 3 days of Paypal payment clearance
30 days return accepted (international shipping at your expenses).
As International buyers, you are required to pay all customs charges (if any requested by your local customs authorities).