SWAG 20 TON Finger Brake Heavy Duty DIY Builder Kit
Commercial vat invoice provided. Carries Stakesy’s 1 year conditional guarantee
Now in 520mm width to suit the presses commonly available in the UK market from companies such as Machine Mart, Sealey and SIP. SWAG have kindly remanufactured this product for Stakesy's. The previous model was 40mm wider and fitted only very large 50 ton presses available in the UK. Check the press you have or will buy has an internal width between the vertical posts of 520mm and you are good to go.
Weld up press brake kit from SWAG Offroad in the USA
Designed to be used with 20 ton hydraulic presses from Clarke, Sealey and SIP etc. (press not included in price)
Kit includes adjustable back stop and side stop for repeatable bends.The top clamping bar is machines from 4140 Cromoly and also includes 4 segmented top tools in the 1", 3", 4" & 9.5" widths. Each segment can be removed or swapped to provide the closest required bending width or to prodide access and clearance in restricted areas.
The heavy duty kit uses the same high quality construction and number of components as the standard duty kit, just built from thicker 3/8" steel and a wider 4.0" bottom die to allow for easier bending of thicker material.
There are a couple of extras available for this kit on the listings below. For smaller returns and thinner material you can add the flat top kit. The standard kit has a wide lower v-die which is great for heavy plate but if you need to put a 10mm return on some 1mm steel sheet the material wont span the lower V die. The flat top kit fits on top and enables you to adjust down to a small bottom tool.
Goosneck dies are also available for double returns. See below.
| Product Code | SWAG20TFBK |
| Max Capacity at 17.875" in Mild Steel | 3/16" |
| Max Capacity at 15" in Mild Steel | 1/4" |
| Max Capacity at 13" in Mild Steel | 5/16" |
| Max Capacity at 11" in Mild Steel | 3/8" |
| Max Capacity at 6" in Mild Steel | 1/2" |
| Max Capacity at 3" in Mild Steel | 5/8" |
| Max Bending Width | 17.875" (454mm) |
| Total Width of Brake | 20.5" (520.0mm) |
| Finger Widths | 1", 3", 4", 9.5" |
| Maximum Bend Angle | 110° |
| Weight | 28kg |
If you have any questions about this product feel free to contact us through eBay 'contact seller' at the top of the listing.
Delivery price does not include Highlands and Islands.
We deliver worldwide. Please contact us for delivery rates if buying from outside UK mainland.