MX4 LANOX LANOLIN LUBRICANT
LANOX Lanolin Lubricant is a heavy duty,
anti-moisture, anti-corrosion lubricant made with a high grade oil and lanolin
base, with specialised chemical compounds. LANOX Is created with Lanolin, a
natural wax found in animal wool, especially the wool from sheep, commonly
referred as ‘WOOL FAT’ or ‘WOOL GREASE’.
Lanolin
has widespread uses, ranging from cosmetics, soaps and medical products to rust
proofing and lubrication. Lanolin has been used in skin care and cosmetics as
far back as 700BC, but in the late nineteenth century it was refined at a new
level, giving us lanolin with an extremely high quality. Although we make INOX,
a quality anti-corrosion lubricant, there are areas where a lanolin based
anti-corrosion lubricant like LANOX is sometimes better suited for the
application at hand.
LANOX
MX4 has ideal applications in the Marine industry. It designed to stop
electrolysis between different metals and prevent oxidation and rust from
forming on the surface. The lanolin base helps to prolong the protection
between applications, as it is a natural anti-corrosion compound that is not
soluble in water and leaves a protective film behind.
INOX
will cover most of the applications most of the times where an anti-corrosion
lubricant is required, but there are times when a heavier, longer lasting
anti-corrosion lubricant is needed to do the job. 4 years of research and
testing went into LANOX before it was brought to the market. About
70% of the time LANOX and INOX can be used for the same application,
INOX is more suitable for the lighter applications such as electrical,
fishing, garage doors, hobbies etc. and LANOX is suitable for
the more extreme climate and high humidity conditions.
For
protection against corrosion and helps reduce fouling.
Keeps
shovels, trowels, floats & formwork clean and corrosion free between use –
Stops mortar and concrete adhering to aluminium frames, window & door glass
on construction and building work sites.
Protects
bare metal surfaces, frame work and welded joints in the open air from
corrosion during construction before painting – Also good for the protection of
all unpainted metal held in storage.
Use
as an anti-seize on track and blade bolts & nuts before screwing together –
Protects all blades and bare metal surfaces between use.
Protects
all painted and bare mental surfaces, sprockets, chains and cables from
corrosion on all tractors, harvesters (grain, sugar, grape, etc), sowers,
vegetable diggers and washers in use and in the off season.
Keeps
pump motors, cables, linkages, couplings and electricals clean and free from
corrosion and lubricated while in use and when in storage.
Protects
outboards, clamps, props and jet skis from salt water corrosion, will not harm
or harden rubber fittings – Keeps control and steering cables and linkages in
good working order, lubricated and corrosion free.
Spray
on all livestock crates and gates (rail , road, etc) to protect from rust and
chemical corrosion before transit or in storage.
Lubricates and protects locks and hinges.
Protects
all bare metal surfaces, pump motors (above and below ground), drag lines,
winches and associated electricals from moisture and corrosion in humid and
adverse weather conditions.
Stops
electrolysis – Keeps winches, cables, slip cradles and wheel bushes lubricated
& corrosion free – protection for all electricals from moisture &
corrosion.
Protects
all painted and bare metal surfaces in the open from moisture and corrosion –
Protects all timber surfaces for water and dry rot ( may slightly darken bare
timber but it will not harm it) – Waterproofs and protects leather harness’s,
boots, etc. Protects Firearms, barrels, etc in long term storage, will not harm
stocks or metal finishes.
Boat,
box & car trailers and horse floats, spray on chassis, springs, axles,
hinges, couplings, winches, cables. light fittings and electricals for
protection from sea air and salt water corrosion.
Spray
on all metal threads before joining, stops threads from corroding together,
makes it easier to undo all joints, nuts, bolts and screws at a later date.
WHAT IS LANOX?
LANOX is a Lanolin based anti-corrosion, anti-moisture lubricant.
What difference is there between LANOX and INOX?
LANOX has been designed for a more heavy duty application than the original
INOX. For long storage protection use MX4.
Can I use LANOX for any applications that I would normally use
INOX?
In about 70% of instances LANOX & INOX will have the same results as both
contain no silicon, acids, kerosene or dieselene. They are both top quality
lubricants, cutting agents and anti-moisture, anti-corrosion sprays.
What are the areas that LANOX would be preferred over INOX?
For example LANOX is more suitable in certain marine applications such as
Anchors, Chains & Shackle Bolts and in the protection of Outboard &
Inboard Motors. INOX would be best used in areas such as Marine Radios, Sail
Tracks (non-staining) and the protection of stainless & aluminium fittings
( good for polishing stainless steel, aluminium & fibreglass). For use in
Firearms, LANOX is best used for long term storages purposes whereas INOX has
better applications for the day to day cleaning and lubrication (anti-static)
so it doesn’t attract dirt and helps clean barrel residues easier.
Does LANOX have applications in the Farming Industry?
Because of it’s Lanolin base it has good long term applications in areas such
as cutter bars on headers, lawnmowers, linkages, etc to protect against rust
and corrosion (spray onto moving parts to give protection during stand down
periods). LANOX is a good anti-corrosion agent for bare metals in storage,
stock crates or as a protectant after welding. LANOX is also a good long term
lubricant for areas that traditionally receive little maintenance attention
(ie. gate hinges, stationary motors, etc).
Does LANOX have applications for Earthmoving Equipment?
LANOX can be used as long term lubrication for linkages, cables couplings, etc
and for corrosion protection in electrical systems as well as an anti-seize on
track bolts
and wheel studs.
Can LANOX be used as a cutting lubricant?
Yes, tests conducted prior to it’s release found that LANOX is an effective
cutting, milling, tapping and thread cutting lubricant for a variety of metals.
It is especially effective on aluminium