Sold by the drop. Multiple drops that are purchased will be shipped connected together in one strand.
We offer two types of cuts, CENTER CUT or LONG LEAD CUT. Both cuts result in the same total length of cable being shipped to you. The CENTER CUT will result in equal lengths of cable on each end of the strand or drop (~ 29"-31"). LONG LEAD CUT will result in about 8" of cable at one end past the drop connector and 51" of cable at the other end past the opposite drop connector.
Please let us know which type of cut you prefer, CENTER CUT or LONG LEAD CUT.
Enphase Engage Landscape Cable: ET17-240-BULK (PN: 840-00136 same as PN: 840-00134)
The Engage™ Cable is a continuous length of 2.5 mm2 (12 AWG), outdoor rated cable with integrated connectors for Enphase Microinverters. These connectors are pre-installed along the Engage Cable at intervals to accommodate PV module widths. The microinverters plug directly into the cable connectors. The Cable is installed by simply rolling out the desired length of cable and cutting it to size. One end is wired directly into the junction box at the head of the branch circuit, eliminating the need for a separate AC interconnect cable. The other end is sealed from the environment using an Enphase Branch Terminator. The microinverter AC cable connectors are then plugged into the regularly-spaced connectors.
Price is for (1) drop connector and attached cabling ~ 67" in length.
Connectors are spaced at 67” on center for landscape (horizontal) module orientation. If you are ordering multiple connectors they will be connected with each other.
The number of connectors should match the number of M215 or M250 Microinverters to be installed.
Cable can also be used for Enphase S Series Enphase inverters utilizing 240VAC.
Features
Fast
- Quick installation
- Large branch capacity
Flexible
- Simple design
- No additional cables
Safe
- No high voltage DC
- Reduced fire risk
Shipments normally made within 1 Business day or less.