NANO SHINE COAT™ is an ultimate paint protection system against all negative environmental effects. Its unique technology helps achieve a thick coating, which protects Your car from bird droppings, acid rains, UV lights. Surfaces, coated with NANO SHINE COAT™ will also inherit highly hydrophobic surface properties, which will enable You to clean Your car easily and with less time and energy. Your car will stay more clean and shiny when coated with NANO SHINE COAT™.

APPLICATION

1. Prepare the surface properly prior coating. It is advised to fully wash the car, apply clay bar, polish with appropriate and required cutting compounds and machines, use silicon-removing cleaners, wash car again and dry the car until it’s fully dry
2. Ensure that there’s no risk of water dripping onto partly cured coating. It is recommended to use a strong air stream to blow any excess water from trim areas
3. If water does drip onto partially cured coating, we recommend re-polishing the affected area and reapplying the NANO SHINE COAT™
4. Surface, prepared for application, must be dry and free of any dirt, water and detergent residues.

AREAS OF APPLICATION: :

• Cars, boats and any other type of transport vehicles (Trains, aircraft, motorcycles etc.)
• Painted surfaces, lacquered body and lights (headlights, taillights, fog lights etc.), black plastic trim surfaces
• Coating is not suitable for chrome, painted plastic parts without lacquer
• Freshly painted parts can be coated, but no earlier than after 4 weeks of painting
• This product is applicable to all lacquered painted plastic surfaces.

Product is recommended as upper layer for CERAMIC ARMOR COAT to achieve best results possible.

Approx. consumption guide for cars:

• Small automobiles (class A-B) 20-30 ml/car
• Medium automobiles (class C-D) 30-40 ml/car
• Large automobiles (class E, SUV) 40-50 ml/car

TECHNICAL CHARACTERISTICS AND DATA

Product volume: 50 ml
Areas of use: Automobiles, motorcycles, yachts
Coating durability:   12 months / 40 carwashes (-40 °C to +40 °C; ph > 12) during harsh conditions; 18-24 months / 60 carwashes (-20 °C to +35 °C; ph < 12) during normal conditions
Temperature resistance:  up to 150 °C
Chemical resistance:  12>Ph>1
Product efficiency: 5-9 ml/m2
Thickness of the coating:  400-600 nm
Scrach durability:  9H ("pencil test")
Shelf life:  12 months
Storage conditions:   -3 °C to +30 °C, keep away from children
Curing period:  6 hours after coating process surface must be protected from water, low temperatures and dirt; after 24 hours period coating fully cures and hardness test can be applied

AntiFog coating for car Windows is advanced product that provides protection against fogging on glass surfaces while reducing uncontrolled water condensation on Windows. The product is ideally suited for the inner surface of car Windows and mirrors. AntiFog also has anti-static anti-dust properties while product does not contain solvents harmful to man and is safe for the environment.

Application:
car Windows and mirrors, home Windows and mirrors, etc.

Coating durability:
Up to 4-6 weeks.

Efficiency:
10-15 ml/m².

Available sizes:
100ml/250ml

NOTE:
The product should be used in accordance with the attached instructions. The coating is not resistable to cleaners or wipers. Anti-fog effect might last for up to 6 months if the coated surface is untouched (cleaning or touching the coated surface removes the nano particles).

NanoWiper will improve visibility in the rain and will help to drive

without using the wipers! NANO WIPER elevates the glass in the

nanometer scale. Silanes nano particles bonds to the surface of the glass,

giving it the properties of hydrophobic and oleo-proofing effect.

Application:
Car Windows, motorcycle fairings.

Durability:
9 - 12 months or 20.000 km (depending on the physico-chemical conditions affecting the surface of the glass).

Available containers: 100 ml Efficiency:8 - 12 ml/m

NANORIM is a coating material on basis of the chemical nanotechnology and achieves an excellent stay-clean and easy-to-clean properties that provides simple removal of dirt from car and motorbike rims, also significantly reducing the adherence of skid dust.

Application:
Suitable for all kinds of rim.

Durability: about 1 year. Efficiency: approx. 5-10 ml per rim.