PT100 Thermocouple Temperature Detector RTD Sensor Converter RS485 Modbus NEW
Product Name:  -20-400 Celsius PT100  Thermocouple Temperature Detector RTD Sensor Tester Converter RS485 Modbus Rtu
 
 
 
Packing list(Please select the product you need):
1 pcs PTA9B01 PT100 RS485 Acquisition module  
1 pcs PT100 sensor
1 pcs Matching shell

Description :

PTA9B01 PT100 RS485 Acquisition module Description:
  
Working voltage: DC 8-25V(Recommend DC 12V)
 
Working current: 8-13MA
 
MODBUS RTU protocol, 03 read command, 06 write command.
 
Serial port baud rate: 9600 (default), N, 8, 1
 
By modifying the 485 address, up to 247 modules can be cascaded (more than 16 please use R485 repeater)
 
Can read temperature and PT100 resistance value
 
Adapted sensor: PT100 3-wire or 2-wire sensor
 
Temperature measurement range: A version -20℃ to +400℃; B version -20℃ to +220℃. It is recommended to select a version with a smaller range within the range that meets the measurement.
 
Temperature measurement accuracy: 1%.
 
Size: 60 X 30 X 16MM
Weight: 16g 
   
MODBUS RTU protocol  please refer to : '' PTA9B01 PT100 RS485 sensor protocol ''
   
PT100 sensor specifications:
 
Type: PT100 Thermocouple
Probe Diameter: 6.5mm
Probe Length: 30mm
Probe Material : Stainless steel
Cable Length: 0.5M
PTFE sheath 3-Wire type
Temperature -200~550°C degree

Shell: 
 
Material: ABS
Outer diameter: 73*36*24MM 
Inner diameter: 70*33*21MM 
Weight: 16 grams
 
 
For more information, please contact us!!!
 
Typical application:

Temperature Detector Tester 
Thermostatic Controls
Industrial Systems
Consumer Products
Thermally Sensitive Systems
Measuring instruments
Indoor and outdoor temperature measurement
Temperature in vegetable garden
Weather forecasting, and monitoring
Temperature in Computer Room
Warehouse temperature 
 
3-wire probe wiring mode: the red wire is connected to P+, and the other two wires of the same color are connected to P- and GND (the ports are not distinguished). 
Note: Please remove the jumper, otherwise it will affect the accuracy

2-wire probe wiring mode: red wire connects to P+, blue wire connects to P-.  
 Note: The jumper must be short-circuited, otherwise it cannot be measured! ! !

RS485 bus wiring diagram:
 

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction. Then we will improve our service immediately.
It is impossible to address issues if we do not know about them.

1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.

  • We only accept payment through Paypal.
  • Items will go to post within 1-2 business days after payment confirmed.

If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

On 09-Mar-21 at 03:48:48 GMT, seller added the following information:

DataCaciques