R3 ATMEGA328P CH340 Development Board, compatible with Arduino UNO R3 IDE
Brand new, sealed package.
In stock, ships from USA (Massachusetts) via First-Class Mail!
Tracking number available on eBay to monitor your delivery.
What's in the Box: 1x R3 Compatible ATMEGA328P Micro-Controller Development Board
The best board to get started with electronics
and coding. If this is your first experience tinkering with the platform, the
board is the most robust board you can start playing with. It is the most
used and documented board.
This is a microcontroller board based on the ATmega328P.
It has 14 digital input/output pins (of which 6 can be used
as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0),
a USB connection, a power jack, an ICSP header and a reset button.
It contains everything needed to support the
microcontroller; simply connect it to a computer with a USB cable or power it
with an AC-to-DC adapter or battery to get started. You can tinker with your
board without worrying too much about doing something wrong, worst case scenario
you can replace the chip and start over again.
The Uno board is the first in a series, and the reference
model for the platform.
Microcontroller |
ATmega328P |
Operating
Voltage |
5V |
Input
Voltage (recommended) |
7-12V |
Input
Voltage (limit) |
6-20V |
Digital
I/O Pins |
14 (of
which 6 provide PWM output) |
PWM Digital I/O Pins |
6 |
Analog
Input Pins |
6 |
DC
Current per I/O Pin |
20 mA |
DC
Current for 3.3V Pin |
50 mA |
Flash
Memory |
32 KB
(ATmega328P) of which 0.5 KB used by bootloader |
SRAM |
2 KB
(ATmega328P) |
EEPROM |
1 KB
(ATmega328P) |
Clock
Speed |
16 MHz |
LED_BUILTIN |
13 |
Length |
68.6 mm |
Width |
53.4 mm |
Weight |
25 g |
*** CHECK OUR
EBAY STORE FOR OTHER GREAT DEALS!! **
https://www.ebay.com/str/dogoodsstore