Specifications:
Material: steel.
Units: kg, lb.
Capacity: 60kg, 132lb.
Accuracy: 0.02kg, 0.05lb.
Accuracy of + / - 0.15% of full capacity.
Easy-viewing big backlight LCD 45x26mm.
Auto power off after 3 minutes of inactivity.
ABS housing, 115x70x32mm without hook and hoop.
Auto calibration.
S-hook: 95mm stainless steel, Ø 8mm.
Safety metal hoop: 90mm, Ø 8.6mm.
Power: 2xAAA batteries(Not included).
Scale with packing: 442g.
Press and hold the OFF button for 3 seconds to switch off the scale.
Press and hold the MODE button for choosing kg/lb.
Tare, Hold, Peak function.
Auto hold and manual hold.

Benefits:
Equipped  with a safety hoop and hook.
Compact, accurate, durable and universal hanging scale.
Very good structural integrity thanks to large tread surface made of safety glass.
Low battery and when the scales are overloaded.
Modern Design: Sleek and slim design with platinum color is nice to decorate your room and gymnasium.
Design for travel suitcase- durable and heavy duty to stand the test of time and travel,ergonomic design, best for travel postal or home use.

Package Includes:
1 x Digital hanging scale 60kg x 0.02kg.
1 x S-hook.
1 x Safety metal hoop.

Proper Operation And Environment:
Avoiding any exposure to extreme heat or cold, your scale works better when operated at normal room temperature. Always allow the scale to acclimate to normal room temperature for at least one hour before use.
Give your scale sufficient warm up time. Usually 30-60 seconds before use to give the internal components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed onto the hook. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Operation:
Hang scale on a vertical position without weight on hook, press ON button. On LCD shows HELLO then set to zero. Now the scale is ready for weighing.
Put the object(s) on the hook and LCD shows the weight readout of the object.
Automatically switch off after 3 minutes or press OFF key for 3 seconds to switch off the scale.

Hold Function:
Press HOLD button to switch on/off AUTO hold function.
If on LCD there is O, it means the readout will be locked on LCD automatically.
When the hold function is switch on, if you want to weigh extra object, just add the extra object, and press the HOLD button to switch off the hold function. New readout will be displayed.
Press HOLD button or MODE button to quit hold function.

Peak Readout Function:
Press MODE button to get PEAK function, on LCD shows ▼.
The biggest readout will be locked on LCD.
Press MODE button or HOLD button it will quit PEAK function, then no ▼ signal on LCD.

Unit Change:
Turn on scale as described above.
Press and hold MODE button to choose the unit: kg, Ib.

Take Weghing:
Turn on scale as described above.
Place the "tare item" on the hook.
Press TARE and wait until zero is displayed.
Add the "net-weight-item" to get the readout.

Precaution:
Every time you use the scale, please keep the scale in a vertical position.
The scale need to be fixed through hoop on a strong and stable place for safety and correctly weighing.
It is better to hold the scale housing then press the button.
If the battery is going to run out, please replace the batteries to get better accuracy.
If the scale will be not used for a long time, please take out the batteries.