2006-2008 2009 2010 2011 2012 2013 Suzuki Grand Vitara Spoiler Roof Wing PRIMER

FACTORY STYLE ROOF SPOILER

For: 2006-2013 Suzuki Grand Vitara

 

INSTALLER NOTES:

1) Position Spoiler on top of Rear Hatch desired position. Use our ebay listing picture for correct spoiler placement.

2) Mark spoiler installation location with a sharpie/marker, 3 locations on center of spoiler holes, onto Rear Hatch

3) Carefully drill 3- 1/16" small pilot holes on top of Rear Hatch

4) Hand Tighten 3 screws provided and apply silicone to prevent leaks

5) Clean 3 small screw covers and installation area where screw covers will install with isopropyl alcohol

6) Apply double sided tape to small screw covers

7) Tape/Install 3 small screw covers onto spoiler 

 

PRODUCT DETAILS

  • NEW INSTALL - Follow Installation Instructions supplied with your purchase
  • REPLACEMENT INSTALL - Will NOT fit in factory holes if a spoiler was previously installed; THIS IS NOT AN OEM DEALER FACTORY REPLACEMENT PART.
  • If a spoiler is being replaced and our part is the EXACT same shape as your old spoiler, then our part may cover the old, predrilled holes/area where previous spoiler was installed.
  • fits US Spec models

 

*Because of variations in handcrafting, customers should know that there may be filling, sanding, re-priming, and/or other processes not mentioned here needed prior to installing parts. This is NOT a warranty issue and MUST be addressed BEFORE final paintwork is completed.

 
Welcome to Our Family of Thousands of Satisfied Customers
2006-2008 2009 2010 2011 2012 2013 Suzuki Grand Vitara Spoiler Roof Wing PRIMER

FACTORY STYLE ROOF SPOILER

For: 2006-2013 Suzuki Grand Vitara

 

INSTALLER NOTES:

1) Position Spoiler on top of Rear Hatch desired position. Use our ebay listing picture for correct spoiler placement.

2) Mark spoiler installation location with a sharpie/marker, 3 locations on center of spoiler holes, onto Rear Hatch

3) Carefully drill 3- 1/16" small pilot holes on top of Rear Hatch

4) Hand Tighten 3 screws provided and apply silicone to prevent leaks

5) Clean 3 small screw covers and installation area where screw covers will install with isopropyl alcohol

6) Apply double sided tape to small screw covers

7) Tape/Install 3 small screw covers onto spoiler 

 

PRODUCT DETAILS

  • NEW INSTALL - Follow Installation Instructions supplied with your purchase
  • REPLACEMENT INSTALL - Will NOT fit in factory holes if a spoiler was previously installed; THIS IS NOT AN OEM DEALER FACTORY REPLACEMENT PART.
  • If a spoiler is being replaced and our part is the EXACT same shape as your old spoiler, then our part may cover the old, predrilled holes/area where previous spoiler was installed.
  • fits US Spec models

 

*Because of variations in handcrafting, customers should know that there may be filling, sanding, re-priming, and/or other processes not mentioned here needed prior to installing parts. This is NOT a warranty issue and MUST be addressed BEFORE final paintwork is completed.

 
Welcome to Our Family of Thousands of Satisfied Customers