Bypass plug for the Datatool S3, Datatool Veto Evo & Veto Evo Plus motorcycle alarms. Can be used as a diagnostic tool to determine whether a fault lies with the alarm or the bike. No need to back trace & rewire the bike. Simply find the alarm unit, using a Torx T10 security screwdriver remove the alarm cover, unplug all the connectors & install the supplied bypass plug. The bike will now behave as it did when it left the factory with no alarm system. Simple plug & play bypass installation, keeps wiring intact should a replacement alarm be required in the future. Will bypass any Datatool S3 alarm unit no matter what bike it is fitted to. Complete with easy to follow instructions. Alternatively for Triumph's fitted with the S3 we also supply the 14 way alarm bypass
plug as used by Triumph, this will also allow the S3 to be removed (if fitted to the Triumph 14 way alarm connector), Click here for more info
Please
note vehicles which have been standing a long time may not easily start
or start at all, this is usually due to bad fuel, gummed up
carbs/injectors, dead
battery, rodent eaten wiring etc etc. This plug will allow the vehicle to
function as long as the vehicle is function-able. If
the bikes starts & runs but cuts out when a gear is selected means
the fault is with the bike, this bypass plug will not fix the problem.