Individually addressable 5 Volt RGB LED Strip  - WS2812B -5 Metre- 60 LED/Metre IP30/IP65/IP67

• Top Quality LED Strip - we've been selling these for over 5 years with excellent reviews.
• IP30 & IP65 LED strips have self adhesive tape on the reverse side. IP67 LED's have no adhesive tape.
• We recommend these are installed in some form of LED Channel with diffusers.
• Perfect for Arduino, ESP 8266/ESP32 projects.
• Please see our other listings if you required Individually addressable LED's in smaller quantities for your projects.

Product Decsription:

1. WS2812B Led Strip is Powered By "5V Power Supply" (Not Included) And Is Controlled By ASingle Data Line From A Suitable Controller(Not Included).

2. 3-Pin JST Connector Included: Red:VCC, Withe:GND, Green:DATA.

3. The Strip Has 3M Adhesive Tape On The Back(Except Ip67). Installation Surface Must Be Smooth, Clean And Dry.

4. Led Strip Can Be Cut Between Every Led To Create Custom Lengths.

5. Do Not Bend Strip Sharply.

6. Longer Runs Should Be Powered From Both Ends To Reduce Voltage Drop.

7. 3-Pin JST Connector Wire is 20AWG.

Products Application:

WS2812B Colour Strips have multiple uses and depending on the ip rating of the product you choose, can be installed indoors and outdoors.

Product Details:

Input Voltage: DC5V

Power: 

60Leds/m----18Watt/meter

LED Resource: WS2812B Led(5050 SMD RGB LED With Built-in Improved Version Of WS2811 IC)

LED: Each Led is Separately Controlled

IC Type: Improved Version WS2812 IC(Built Inside The 5050SMD RGB LED)

Of IC: 1 IC Drives 1 Led Chip

Pixels: 60/Meters

Pitch: 16.6mm(1000/64)

Grey Scale: 256

Bits/Color: 8-Bits/Color

FPC Width: 

60Leds/m----10mm

FPC color: Black/White

Protection Rate: IP30/ IP65 /IP67

Colors: Full Colour RGB, Dream Colour Changing

Cuttable: Every LED is Cuttable

Package:In Anti-Static Bag,IP30 IP65 With Adhesive Tape On The Back(IP67 Without Adhesive)

Package Contents:

5m WS2812B Led Strip

Fly lead which you can connect to your controller which plugs into the correct connection on the LED strip.

Important information below - PLEASE READ BEFORE ORDERING!!

Please note this is for a strip of 5 Metre LED's. 

IT DOES NOT INCLUDE A POWER SUPPLY OR CONTROLLER. 

THE CUSTOMER IS RESPONSIBLE FOR ENSURING THAT A SUITABLE POWER SUPPLY AND CONTROLLER IS USED WITH THIS PRODUCT.

These LED's will not work unless you use a suitable controller and power supply. 

These must be connected in the correct direction which is indicated on the LED Strip. If you connect the data signal to the wrong end of these LED's you will damage them

These are 5 volt LED's. THEY MUST NOT BE USED WITH ANYTHING OTHER THAN A 5V Supply

These are not suitable for your off the shelf LED smart controllers which are usually 12volt.

If you are unsure please ask before purchasing.

We test all LED's before despatch to ensure they work as they should and we are supplying you with a quality product that is fully working.