4in1 100A AC Digital Combo Monitor Voltage Current kWh Energy Power Meter V/A/PW
Model: PZEM-011
A. Function
1. Electrical parameter measurement function (voltage, current, active power, energy)
2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
3. Power alarm threshold preset function (can set power alarm threshold).
4. Reset energy function.
5. Store data when power off.
6. STN whole viewing angleLCD (display voltage, current, active power/energy at the same time)
7. Backlight function.
B. Appearance and Key function
= 1 \* ROMAN I. Display Interface
The large-screen STN whole viewing angle LCD can display voltage, current, power, energy at the same time.(note: power and energy display can be switched by the key.)
= 2 \* ROMAN II.Display format
1.Power: test range 0~22kW
within 1KW, the display format is 0.0~999.9W;
1KW and above, the display format is 1000~9999W.
10KW and above, the display format is 10.0~22.0kW
2.Energy: test range: 0~9999kWh
Within 10KWh, the display format is 0~9999Wh;
10kWh and above, the display format is 10~9999kWh.
3.Voltage: test range: 80~260V
Display format: 80~260V
4.Current: test range: 0~100A
Display format: 0.00~99.99A
= 3 \* ROMAN III. Key
1.Backlight control
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
2. Reset energy
Step1: Long press the key for at least 3 seconds until the number in energy display area flash, then release the key.
Step2: If short press the key again, then the energy value is cleared and exit the reset state.
If short press the key again, then the energy value will not be cleared and will exit the reset state.
If there is no operation on the key within 10 seconds, the energy value will not be cleared and will exit the reset state.
3.Set power alarm threshold
Step1: Long press the key at least 3 seconds until the number in power display area flash,then release the key
4.Power/Energy switch
You can short press the key to switch display the power/ energy, the display state will be store when power off.
C. Precautions
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.
D. Specification parameters
1. Working voltage: 80 ~ 260VAC
2. Test voltage: 80 ~ 260VAC
3. Rated power: 22kW
4. Operating frequency: 45-65Hz
5. Measurement accuracy: 1.0 grade
Package include:
1 x AC 80 to 260V LCD Digital 100A Volt Watt Power Meter Ammeter Voltmeter 110V 220V
2.We only ship to ebay confirmed address. So before bidding, please kindly verify your ebay address.
3.Shipping to most countries takes about 12-30 days via Economy Int'l Airmail.
Less than $40, without free tracking number,if you request tracking number,please send ebay message to us.
Over $40,with tracking number free.The shipping time depends on your location and local postal service,as well as the weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you not get your package
4.Express shipping: DHL/FEDEX/EMS,Extra $20 --$25 will be charged for the first 500 grams for most countries. Send ebay message to us if you need this service.
We accept paypal only
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please send ebay message to us immediately. Returns accepted within 30 days of delivery date.
3. Please send ebay message to us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.